User's Manual

Cannot send or receive faxes
• Once you have registered a mobile telephone as your fax server, you will need to
enter the fax settings from the [Printer and Faxes] window in the Control Panel.
Please refer to "
Using a modem station for fax transmissions" for information on
the configuration procedure.
• The telephone number of the fax destination may have been entered incorrectly.
Please check the telephone number.
• If the setting under
COM Auto Connect Settings hasbeensetto"Off",a
connection will not automatically be established with the modem. Please connect
to the mobile telephone manually.
• The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right-click on the
[Fax] icon, and then click on [Properties]
The [Fax properties] window will appear.
2. Select the [Device] tab, right-click on the modem you wish to use, and
then click on [Properties]