User's Manual

Cannot connect to the Internet
• The telephone number of the connection (i.e., the telephone number for the access
point of your Internet service provider) may not be correct. Please check the
telephone number.
• The user ID and/or password for the provider with whom you have signed up may
have been entered incorrectly. Please check the user ID and password.
• The default connection may have been configured with different settings. Please
set the connection configured for mobile telephone use as the
default connection.
• When you place a call using a company switchboard or other exchange, the
system may require you to enter a "0" before the telephone number itself. Please
check the type of telephone line you are using.
Cannot send or receive faxes
• Once you have registered a wireless modem station as your fax server, you will
need to enter the fax settings from the [Printer and Faxes] window in the Control
Panel.
Please refer to "
Using a modem station for fax transmissions" for information on
the configuration procedure.
• The telephone number of the fax destination may have been entered incorrectly.
Please check the telephone number.
• If the setting under
COM Auto Connect Settings hasbeensetto"Off",a
connection will not automatically be established with the modem. Please connect
to the modem manually.
• When you place a call using a company switchboard or other exchange, the
system may require you to enter a "0" before the telephone number itself. Please
check the type of telephone line you are using.
• The fax service may not have been enabled for sending (or receiving).
Please check the settings by following the procedure below.
1. Open [Printers and Faxes] from the Control Panel, right-click on the
[Fax] icon, and then click on [Properties]