User's Manual

+
-
46
Suspend Mode
In Standby and Hibernation, the CPU clock is stopped and most of the Note-
book PC devices are put in their lowest active state. The suspend mode is the
lowest power state of the Notebook PC. The Notebook PC enters Suspend when
the system remains idle for a specified amount of time or manually using the [Fn][F1]
keys. The Power LED blinks when the Notebook PC is in STR mode. In STD mode,
the Notebook PC will appear to be powered OFF. Recover from STR by pressing
any keyboard button (except Fn). Recover from STD by using the power switch
(just like powering ON the Notebook PC).
Power Savings
The Notebook PC enters Standby mode (low priority) when the system remains
idle for a specified amount of time. The timeout can be set through BIOS setup
(lower priority) and Windows power management (higher priority). To resume system
operation, press any key.
Power State Summary
STATE ENTRY EVENT EXIT EVENT
Stand by • Stand by through Windows Start button, • Any device
• Timer as set though “Power Management” • Battery low
in Windows Control Panel (higher priority)
STR (Standy By) • Ring indicator • Any Key
(Save-to-RAM) • Sleep button [FN F1]
STD (Hibernate) • Power button • Power button
(Save-to-Disk) • Battery Extremely Low