User Manual

9
1. Configure your wireless settings via the wireless router’s web graphics user
interface (web GUI).
a. Launch your web browser such as Internet Explorer, Firefox, Google Chrome, or Safari.
Getting started
NOTE: If QIS does not launch automatically, follow these steps to manually
launch QIS:
• On your web browser, key in http://192.168.1.1. Use the default username
admin and password admin to log into the user interface.
• Click GO in the Quick Internet Setup eld under Internet status in the Network
Map page.
b. The wireless router’s Quick Internet Setup (QIS) feature automatically detects if your
ISP connection type is Dynamic IP, PPPoE, PPTP, L2TP, and Static IP. Key in the
necessary information for your connection type.
NOTES:
• The auto-detection of your ISP connection type takes place when you congure
the wireless router for the rst time or when your wireless router is reset to its
default settings.
• If QIS does not detect your Internet connection type, click Skip to manual
setting and manually congure your connection settings.
IMPORTANT! Obtain the necessary information about your Internet connection
type from your Internet Service Provider (ISP).
English