User's Manual

16
RT-N10 Chapter 3: Conguring the clients
Setting up the AP mode using the QIS
In the AP mode, the RT-N10 receives the WAN IP address from the router
connected to the WAN port and provides you with wireless radio. The NAT, rewall,
and IP sharing services are disabled.
To set up the AP mode using the QIS:
1. Connect your devices.
W
P
S
RT-N10
Client
Modem
Router
2. Launch the web browser and the QIS web page appears automatically. Choose
the AP mode, then click Next.
Note: If the QIS web page does not appear after you launched the web browser, disable the
proxy settings of the web browser.
3. Congure the wireless security settings including the SSID, authentication and
encryption methods. Click Finish.