User's Manual

15
Chapter 2: Setting up the hardware RT-N10
Setting up the Repeater mode using the QIS
In the Repeater mode, the RT-N10 extends your wireless network and provides
you with higher quality wireless radio. The NAT, rewall, and IP sharing services
are disabled.
To set up the Repeater mode using the QIS:
1. Connect your devices.
2. Launch the web browser and the QIS web page appears automatically. Choose
the Repeater mode, then click Next.
Note: If the QIS web page does not appear after you launched the web browser, disable the
proxy settings of the web browser.
3. Select the AP whose wireless signal you want to extend, then click Connect.
W
P
S
RT-N10
Client
Modem
Wireless Router