User's Manual

RT-N10 Chapter 2: Setting up the hardware

2. Launch the web browser and the QIS web page appears automatically. Choose

the Router mode, then click Next.

Note: If the QIS web page does not appear after you launched the web browser, disable the

proxy settings of the web browser.

Setting up the Router mode using the QIS

In the Router mode, the RT-N10 connects to WAN (Internet) by PPPoE, Automatic

IP, PPTP, L2TP, or Static IP, and provides you with wireless radio. The NAT,

rewall, and IP sharing services in LAN are enabled.

To set up the Router mode using the QIS:

1. Connect your devices.

RT-N10

Modem

Client