User's Manual
13
English
• Check whether the wireless channel in use conforms to the
channels available in your country/area.
• Check the encryption settings.• Check if the ADSL or Cable con-
nection is correct.
• Retry using another Ethernet cable.
If the ADSL “LINK” light blinks continuously or stays o,
Internet access is not possible - the Router is unable to
establish a connection with the ADSL network.
• Ensure that all your cables are all properly connected .
• Disconnect the power cord from the ADSL or cable modem,
wait a few minutes, then reconnect the cord.
• If the ADSL light continues to blink or stays OFF, contact your
ADSL service provider.
Network name or encryption keys are forgotten.
• Try setting up the wired connection and conguring the wire-
less encryption again.
• Press the Reset button of the wireless router for more than ve
seconds.
• Factory default settings:
User name / Pass-
word: admin / admin
IP address:
192.168.50.1
SSID:
Check the rating label
on the back side of
your router
Where can I nd more information about the wireless router?
• User Manual in the support CD
• Online FAQ site: http://support.asus.com/faq
• Technical Support site: http://support.asus.com
• Customer Hotline: Refer to the Support Hotline in this Quick
Start Guide
na10332_rt-ac1200g_qsg.indb 13 2015/6/8 11:50:53