User's Manual

Wi2Wi, Inc. Doc No. AST-PDT-DOC Rev.1.1
Data Sheet, WLAN-Bluetooth SiP– W2CBW003
Dated: October 20, 2006
The content of this document is to be treated as strictly confidential and is not to be disclosed,
reproduced or used, except as authorized in writing by Wi2Wi, Inc.
Copyright © 2006 Wi2Wi, Inc.
Page 9 of 19
6 Mbps, 10% PER -81 dBm
9 Mbps, 10% PER -81 dBm
12 Mbps, 10% PER -81 dBm
18 Mbps, 10% PER -78 dBm
24 Mbps, 10% PER -74 dBm
36 Mbps, 10% PER -73 dBm
48 Mbps, 10% PER -68 dBm
Receive Sensitivity
54 Mbps, 10% PER -67 dBm
Maximum Receive Level PER<10%
IEEE
Compliant dBm
Transmit Frequency Offset Low, Middle, High Channels ±10 PPM
-
30@fc±11MHz
-
40@fc±20MHz
Spectral Mask Max. TX Power
-
50@fc±30MHz
dBc
Error Vector Magnitude Max. TX Power @ 11Mbps -30 dB
Carrier Suppression Max. TX Power -25 dBc
Adjacent Channel Rejection
Desired channel is 3dB above
sensitivity, 11Mbps, PER<8%
15 dBc
Bluetooth Current Consumption
Initialization Current 20 mA
Continuous Transmit Mode 45 50 59 mA
Continuous Receive Mode 32 36 42 mA
IEEE 802.11 Power Save
Mode 4 mA
Bluetooth RF System Specifications
Transmit Power Output 1.5 3 4 dBm
1 Mbps, 0.1% BER -84 dBm
2 Mbps, 0.1% BER -87 dBm
Receive Sensitivity
3 Mbps, 0.1% BER -80 dBm
Initial Carrier Frequency
Tolerance 5 kHz
Drift Rate 10 kHz
Drift (single slot packet) 10 kHz
Drift (five slot packet) 13 kHz
Carrier Frequency Drift Rate,
DH5 13 kHz
ǻf1avg Maximum
Modulation
165
kHz
ǻf2max Minimum
Modulation
168
kHz
ǻf2 avg /ǻf1 avg
1.02
20dB Bandwidth 654 kHz