User's Manual

Setting your UMPC on Sleep or Hibernate mode

If you want a quick and simple way to conserve power, you can set your UMPC on

Sleep or Hibernate mode:

• Sleep is the same as Suspend-to-RAM (STR). This function stores your current

data and status in RAM while many components are turned OFF. Because RAM is

volatile, it requires power to keep (refresh) the data.

• Hibernate is the same as Suspend-to-Disk (STD) and stores your current data and

status on the hard disk drive. By doing this, RAM does not have to be periodically

refreshed and power consumption is greatly reduced but not completely eliminated

because certain wake-up components like LAN needs to remain powered.

“Hibernate” saves more power compared to “Sleep”.

To set your UMPC on Sleep or Hibernate mode:

1. From your UMPC screen, go to Start.

2. Click the arrow next to the lock icon to display the

menu.

3. From the menu, select either Sleep or Hibernate.