User's Manual

CE Mark Warning

This is a Class B product, in a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

IC Radiation Exposure Statement for Canada

This equipment complies with IC radiation exposure limits set forth for an uncontrolled

environment. To maintain compliance with IC RF exposure compliance requirements,

please avoid direct contact to the transmitting antenna during transmitting. End users

must follow the specic operating instructions for satisfying RF exposure compliance.

Operation is subject to the following two conditions:

• This device may not cause interference and

• This device must accept any interference, including interference that may cause

undesired operation of the device.

To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite

systems) this device is intended to be operated indoors and away from windows

to provide maximum shielding. Equipment (or its transmit antenna) that is installed

outdoors is subject to licensing.

Because high power radars are allocated as primary users (meaning they have priority)

in 5250-5350 MHz, these radars could cause interference and/or damage to license

exempt LAN devices.

Wireless Operation Channel for Different Domains

N. America 2.412-2.462 GHz Ch01 through CH11

Japan 2.412-2.484 GHz Ch01 through Ch14

Europe ETSI 2.412-2.472 GHz Ch01 through Ch13

France Restricted Wireless Frequency Bands

Some areas of France have a restricted frequency band. The worst case maximum

authorized power indoors are:

• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)

• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz

NOTE: Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.