UltraMobilePC Hardware User’s Manual 1.
UltraMobilePC Contents 1. Introducing the UltraMobilePC About This User’s Manual �������������������������������������������������������������������������� 6 Notes For This Manual ��������������������������������������������������������������������������� 6 Preparing your UltraMobilePC �������������������������������������������������������������������� 9 2.
UltraMobilePC 4. Using the UltraMobilePC Operating System ������������������������������������������������������������������������������������� 28 Support Software ��������������������������������������������������������������������������������� 28 Fast-Ethernet Connection �������������������������������������������������������������������� 29 Wireless LAN Connection ...................................�������������������������������� 30 Bluetooth Wireless Connection ...................................
UltraMobilePC
UltraMobilePC 1.
UltraMobilePC About This User’s Manual You are reading the UltraMobilePC User’s Manual. This User’s Manual provides information on the various components in the UltraMobilePC and how to use them. The following are major sections of this User’s Manuals: 1. Introducing the UltraMobilePC Introduces you to the UltraMobilePC and this User’s Manual. 2. Knowing the Parts Gives you information on the UltraMobilePC’s components. 3. Getting Started Gives you information on getting started with the UltraMobilePC. 4.
UltraMobilePC Safety Precautions The following safety precautions will increase the life of the UltraMobilePC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners, benzene, or other chemicals on or near the surface. IMPORTANT! Disconnect the AC power and remove the battery pack(s) before cleaning.
UltraMobilePC Transportation Precautions To prepare the UltraMobilePC for transport, you should turn it OFF and disconnect all external peripherals to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the UltraMobilePC while the power is still ON.
UltraMobilePC Preparing your UltraMobilePC These are only quick instructions for using your UltraMobilePC. Read the later pages for detailed information on using your UltraMobilePC. 1. Install the battery pack 2. Connect the AC Power Adapter 2 1 3 3. Remove the Tablet Pen 4. Turn ON the UltraMobilePC 1.3M PIXELS Extend the Tablet Pen as shown. AV-OUT HOLD WIRELESS Then Tablet Pen can be inserted in the extended form and then contracted while pressing the Tablet Pen flush with the UltraMobilePC.
UltraMobilePC 10
UltraMobilePC 2.
UltraMobilePC Front Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 2 3 1.3M PIXELS 12 4 11 10 5 9 8 6 7 1 Display Panel 2 Camera 3 Microphone (Built-in) 4 Thumbstick Cursor Control The display panel functions the same as a desktop monitor. The UltraMobilePC uses an active matrix TFT LCD, which provides excellent viewing like that of desktop monitors.
UltraMobilePC Page Up & Page Down 6 UltraMobilePC Settings Button 7 Status Indicators Audio Speaker InstantFun+ Key 10 Direction & Enter Buttons 11 Thumbstick Cursor Buttons 12 Fingerprint Scanner / Scrolling The Page Up and Page Down buttons act the same way as those on a keyboard. The UltraMobilePC settings button bring up an easy menu to customize the UltraMobilePC to your desire. Status indicator details are described in section 3.
UltraMobilePC Right Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 1 LAN Port 2 Expansion Port 2 3 4 5 6 <-combo-> The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.
UltraMobilePC Headphone Output Jack 6 Power (DC) Input The stereo headphone jack (1/8 inch) is used to connect the UltraMobilePC’s audio out signal to amplified speakers or headphones. Using this jack automatically disables the built-in speakers. The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the UltraMobilePC and charges the internal battery pack.
UltraMobilePC Top Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 1 1 AV-OUT HOLD WIRELESS LOGIN POWER 2 3 2.0 AV-OUT HOLD WIRELESS LOGIN POWER 2 3 4 5 6 7 8 AV-OUT Audio/Video output port for connection to audio/video devices. USB Port (2.0/1.1) The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.
UltraMobilePC AV-OUT HOLD 7 WIRELESS LOGIN POWER AV-OUT HOLD WIRELESS LOGIN POWER LOGIN Button The LOGIN button sends [Ctrl][Alt][Del] keyboard combination to the operating system to show Windows Security for logging in/off, locking, shutting down, showing task manager, or changing passwords. Power Switch The power switch allows powering ON and OFF the UltraMobilePC and recovering from STD. Use the switch once to turn ON and once to turn OFF the UltraMobilePC.
UltraMobilePC Back Side Refer to the diagram below to identify the components on this side of the UltraMobilePC. 2 1 3 1 Battery Pack 2 GPS Antenna (built-in) 3 Touchscreen Pen Compartment The battery pack is automatically charged when connected to an AC power source and maintains power to the UltraMobilePC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage and by the specifications for this UltraMobilePC.
UltraMobilePC 3.
UltraMobilePC Power System Using AC Power The UltraMobilePC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall outlet to the DC power required by the UltraMobilePC. Your UltraMobilePC comes with a universal AC-DC adapter. That means that you may connect the power cord to any 100V-120V as well as 220V-240V outlets without setting switches or using power converters.
UltraMobilePC Using Battery Power The UltraMobilePC is designed to work with a removable battery pack. The battery pack consists of a set of battery cells housed together. A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a UltraMobilePC retailer.
UltraMobilePC Powering ON the UltraMobilePC The UltraMobilePC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the system configuration, press [F2] upon bootup to enter the BIOS Setup. If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen.
UltraMobilePC Checking Battery Power The battery system implements the Smart Battery standard under the Windows environment, which allows the battery to accurately report the amount of charge left in the battery. A fullycharged battery pack provides the UltraMobilePC a few hours of working power. But the actual figure varies depending on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.
UltraMobilePC Restarting or Rebooting After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. To restart (Screens are different depending on security settings.) the system manually, click Windows Start button and select Shut Down and then choose Restart.
UltraMobilePC Status Indicators 1.3M PIXELS Power Indicator The power indicator lights when the UltraMobilePC is turned ON and blinks slowly when the UltraMobilePC is in the Suspend-to-RAM (Standby) mode. This indicator is OFF when the UltraMobilePC is turned OFF or in the Suspend-to-Disk (Hibernation) Battery Charge Indicator The battery charge indicator shows the status of the battery’s power as follows: ON: The UltraMobilePC’s battery is charging when AC power is connected.
