User's Manual

server name must match exactly the server name found on the certificate. The
server name should include the complete domain name (for example,
Servername.Domain name).
● Domain name must end with the specified entry: When selected, the
server name identifies a domain, and the certificate must have a server name
that belongs to this domain or to one of its subdomains (for example,
zeelans.com, where the server is blueberry.zeelans.com). NOTE: These
parameters should be obtained from the administrator.
Notes about Certificates: The specified identity should match the Issued to
identity in the certificate and should be registered on the authentication server
(for example, RADIUS server) that is used by the authenticator. Your certificate
must be valid with respect to the authentication server. This requirement
depends on the authentication server and generally means that the
authentication server must know the issuer of your certificate as a Certificate
Authority. Use the same user name you used to log in when the certificate was
installed.
4. Select the certificate from the list.
5. Click OK. The client certificate information appears under Client Certificate.
6. Click Close.
7. Click Next.
8. Click the new profile at the end of the Profiles list. Use the up and down arrows to
change the priority of the new profile.
9. Click Connect to connect to the selected wireless network.
If you did not select Use Windows logon on the Security Settings page and
also did not configure user credentials, no credentials are saved for this profile.
Please enter your credentials to authenticate to the network.
10. Click OK to close Intel PROSet/Wireless.
PEAP-TLS Certificate Auto Enrollment
In the Application Settings (Advanced Settings), select Intel(R) PROSet TLS Certificate
Rejected Warning if you want a warning issued when a PEAP-TLS certificate is
rejected.When a certificate has an invalid field expiration date, you are notified that you
must take one of the following actions:A potential authentication problem for profile
<profile name> has been detected. The expiration date in the associated
certificate may be invalid. Choose one of the following options:
Control
Description
Continue with current parameters. Continue with the current certificate.
Update certificate manually. The Select Certificate page opens for you to
choose another certificate.