User's Manual

1. Obtain and install a client certificate, refer to Set up the Client for TLS authentication
or consult your system administrator.
2. Select one of the following to obtain a certificate:
■ Use my smart card: Select if the certificate resides on a smart card.
■ Use the certificate issued to this computer: Click Select to choose a
certificate that resides in the machine store.
■ Use a user certificate on this computer. Click Select to choose a certificate
that resides on this computer.
3. Click Next.
Step 2 of 2: PEAP Server
1. Select one of the following options:
● Certificate Issuer: Click Any Trusted CA as the default.
● Click allow intermediate certificates to allow a number of unspecified
certificates to be in the server certificate chain between the server certificate
and the specified CA. If cleared, then the specified CA must have directly
issued the server certificate.
● Specify Server or Certificate Name:
2. Server or Certificate Name: Enter the server name.
3. The server name or domain to which the server belongs, depends on which of the
two options below has been selected.
● Server name must match the specified entry exactly: When selected, the