User's Manual
PL-X31M,PL-X32M User Manual
3
3 Adapter
3.1 Ethernet Interface
Use one end of a network cable to connect the Ethernet interface. Use the other end
of the cable to connect the Ethernet interface of the computer or another
Ethernet-enabled network device.
3.2 Buttons
Figure 1 Side panel of the device
Reset: Restore the factory defaults.
Security: Set the membership state.
Pressing and holding the NMK button for more than 10 seconds randomizes
the NMK value.
Pressing and holding the NMK button for more than 3 seconds makes the