User's Manual

PL-X31M,PL-X32M User Manual
1
1 Introduction
The PL-X31M, PL-X32M (also called “the device” hereinafter) is a low power
consumption PLC device developed based on the master chip of INT6400. It can
transmit the network data in the power line. The device is compatible with the latest
requirements of the EUP Directive. When the device enters the lower power
consumption mode, the consumption is less than 1W.
The device can detect 200 Mbps PLC-Ethernet bridge devices in the power line
network, measure data rate performance, ensure the security of the powering
network, and perform system diagnosis.
1.1 System Requirements
Operating System Windows 98SE, Windows 2000, Windows
ME, Windows XP 32/64 bit and Windows
Vista 32/ 64bit
CPU Intel Pentium III or higher and clock rate
faster than 2.0 GHz are recommended.
RAM At least 128 MB
Screen Resolution Any resolution
Free Disk Space At least 20 MB
Network Interface At least one fast Ethernet (100 Mbps)
network interface card (NIC) and one
Ethernet cord
1.2 Packing List
 2 x Mini-PLC Devices
 1 x CD-ROM
 2 x RJ45 Ethernet cables