User's Manual

PL-X31M,PL-X32M User Manual
13
All HomePlug devices are loaded using a default logical network (network name),
which is normally “HomePlug”. In the Privacy screen, you can modify a private
network by changing network names and passwords of devices.
Click Use Default or enter HomePlug as the network name, to reset to the
HomePlug network (Public).
Figure 9 Privacy tab
Note:
If the network name changes to anything other than HomePlug, the network type in
the main screen is displayed as Private.
Set Local Device Only
This button is used to change the network name and password of the local device. If
a new network password is entered, all the devices appeared in the Main panel prior
to this are no longer present in the new network, effectively making the local devices
not to communicate to the devices which are in the old logical network. Click Set
Local Dive Only, the devices previously set up with the same logical network (same