User's Manual

PL-X31M,PL-X32M User Manual
10
whether the autoscan function is on. The following information is displayed for all
devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To change the
name, click Rename or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it. The
procedure for setting the password of the device (required when creating a private
network) is as follows:
Step1 Click the device name to select the device in the lower panel.
Step2 Click Enter Password. A dialog box appears, showing the device name
and password. See Figure 7.