User's Manual

Preamble Mode - Select the preamble mode. The default value is Auto.

PCE-N10 WLAN Card User Manual

Config - Advanced

This Advanced page is intended for

experienced users to set up additional

arameters for the WLAN card. We

recommend that you keep the default

values.

RTS Threshold (0-2347) - The Request to Send/Clear to Send (RTS/CTS)

function is used to minimize collisions among wireless stations. When RTS/CTS is

enabled, the router refrains from sending a data frame until another RTS/CTS

handshake is

completed. Enable RTS/CTS by setting a specific packet size threshold. The

default value (2347) is recommended.

Fragmentation Threshold (256-2346) - Fragmentation is used to divide 802.11

frames into smaller pieces (fragments) that are sent separately to the destination.

Enable fragmentation by setting a specific packet size threshold. If there is

an excessive number of collisions on the WLAN, experiment with different

fragmentation values to increase the reliability of frame transmissions. The default

value (2346) is recommended for normal use.

ASUS WLAN Card

5. Using Windows® Wireless Function

Left-click the ASUS WLAN Control

Center system tray icon, then click Exit

button, then, ASUS WLAN Control Center

will be switched off.

Click Windows Wireless button to use it.