User's Manual

PCE-N10 WLAN Card User Manual
In the Soft AP mode, you can limit the wireless clients that associate with the
WLAN card through the access control policy page. Click Configuration table, click Edit
Config button and then, click ACL button.
1.To disable the access control function,
click Disable button from the Access
Control Policy.
2. To allow a wireless client to associate
with the WLAN card:
a. Select Access button from the
Access
Control Policy.
b. Key in its MAC address in the
lower left column.
c. Click Add Mac button.
Only the wireless clients on the Accept list are allowed to associate with the WLAN
card.
3.To prevent a wireless client from associating with the WLAN card:
a. Select Reject button from the Access Control Policy.
b. Key in its MAC address in the lower left column.
c. Click Add Mac button.
The wireless clients on the Reject list are not allowed to associate with the WLAN
card.
6
ASUS WLAN Card