User's Manual

Chapter 2: Hardware Installation 2-3
5. Carefully insert the card into the Wi-Fi slot.
To prevent incorrect orientation, a WiFi-b™ connector pin is removed to match the
covered hole on the Wi-Fi slot.
6. Secure the card with the screw that you removed earlier.
7. Replace the PC cover and plug in the power cord.
9. Connect the dipolar antenna twist-on connector to the antenna connector
(male) of the WiFi-b™ card.
8. Turn on the computer.
2.3 Antenna placement
Place the antenna at an elevated location to receive or transmit better signal. Do
not place the antenna under your table or in a closed compartment.
An installed WiFi-b™ card