Mars II PDA Phone User Manual O2/X da Zinc
E2694 First Edition V1 June 2006 Copyright © 2006 O2 Co. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents MarsII specifications ............................................................................. 8 Package contents .................................................................................. 9 Chapter 1: Getting started Getting to know your MarsII ............................................................... 12 Layout ..................................................................................................... 12 Device components description ......................
Chapter : Entering data Using the Input Panel .......................................................................... 28 Using the Block Recognizer .......................................................................... 28 Using the on-screen keyboard ...................................................................... 29 Using the Letter Recognizer.......................................................................... 30 Using the Transcriber ...................................................
Using the phone pad ..................................................................................... 48 Making calls from Contacts ........................................................................... 50 Making calls from Call History ....................................................................... 50 Using the Speed Dial .................................................................................... 51 Using Voice Command...............................................................
Joystick functions in camera mode ............................................................... 87 Camera mode screen.................................................................................... 89 Taking photos ................................................................................................ 97 Video mode screen ..................................................................................... 101 Recording videos ..................................................................
MarsII specifications Processor Intel® PXA270 520MHZ application processor Operating System Microsoft® Windows Mobile™ 5.0 Pocket PC Phone Edition Memory 128 MB Flash ROM 64 MB RAM Display 2.8-inch, 65, 536-color, 240 x 320-resolution, transreflective TFT touch screen LCD Frequency band GSM (900/1800/1900 MHz), WCDMA2100 GPRS Class B, Multislot class 10 Connectivity Wifi: 802.11b+g, Bluetooth: V2.0, Infrared: SIR, USB: USB Client 1.1 Camera 2.
Package contents Check your MarsII package for the following items: • ASUS MarsII device x 1 • Battery x 1 • AC Adapter x 1 • USB Cable x 1 • Stylus x 1 • Protection case x 1 • Headset x 1 • Companion CD x 1, Bonus CD x 1 • User Manual x 1 • Quick Start Guide x 1 NOTE: If any of the above items is damaged or missing, contact your retailer. CAUTION: • To reduce risk of fire, use only correct battery type. Refer to “Installing the SIM card and battery” section for details.
Chapter 1 Getting started • Getting to know your MarsII • Getting your device ready • Starting up • The Today screen
Getting to know your MarsII Components: Layout 1 Stylus 2 Power button 2 I 3 Volume controller 1 4 Backlight switch Top features 5 Mini-SD slot 6 Earpiece receiver 6 7 7 Notification LED 8 8 3 9 LCD touch screen 10 Call Key 11 Left Soft key 4 12 Start button 13 Navigation pad 9 14 Right Soft Key 15 Messaging 16 End Button 5 11 10 14 12 10 Left side features 16 13 15 Front features
Getting to know your MarsII Components: 17 Self-Portrait Mirror 17 21 19 18 18 Camera lens 19 Camera flash light 20 Battery compartment 21 Infrared (IR) port 22 Camera button 23 Earphone Jack 24 Mini-USB connector 20 Designed for 22 Windows Mobile Rear features 23 Right side features 24 Bottom features 11
Device components description No. Item Description 1 Stylus Use the stylus to write, draw, or select items on the touch screen. 2 Power button Press once to set suspend mode or to wake device from sleep mode. Press and hold to turn the power ON or OFF. 3 Volume controller Press the arrow buttons to adjust the volume. 4 Backlight Switch Use this switch to adjust the brightness of the LCD touch screen. 5 Mini-SD slot Allows you to insert a Mini-SD storage card.
Device components description No. 13 Item Description Navigation pad Press this multi-directional control up, down, left, or right to move through menus, program instructions; carry out the selection by pressing the center button. 14 Right Soft key Performs the task indicated above the button. 15 Messaging Press to quick start your Messaging. 16 End button Press to end a call. 17 Self-Portrait Mirror Press this multi-directional control up, down, left, or right to move through menus.
The QWERTY keyboard MarsII device provides you with a QWERTY keyboard, which is similar to a standard PC keyboard. Slide the screen panel to the right to reveal the keyboard (see figure below) . 1Q 2W ! =S # - _ A Chr z Cap Shift “ E3 4R 5T 6Y D $ % & X OK C ~Tab OK key Cap Shift Start key 1 F G V + H B Space 7U *J @ , N .
Using the QWERTY keyboard You can follow the tips below to use the kayboard • Using “Cap Shift” key to type uppercase letter. • Press the Left/Right SOFT KEY to perform the command shown in the label above the key. • Press “OK” key to verify your data enttries or exit the program in use. • Press “Start” key to launch the Start menu. • Press the navigation keys for directional movement.
Getting your device ready Installing the SIM card and battery Before you can make a phone call using your MarsII, you need to install a Subscriber Identity Module (SIM) card. A SIM card contains your phone number, subscriber details, phonebook, and additional phone memory. Your MarsII comes with a rechargeable Lithium-Ion battery. New batteries come partially discharged and should be fully charged before using them.
2. Remove the battery. 3. Insert the SIM card with its gold contacts facing down and the notched corner oriented to the upper left corner of the slot as shown. 4. Replace the battery into the compartment with its copper contacts aligned to the copper conductor on the device. 5. Replace battery compartment cover.
Charging the battery The bundled battery pack is shipped partially charged. Charge the battery up to four (4) hours before using for the first time. To charge battery: 1. Connect the AC adapter plug to the system connector at the bottom of the device. 2. Connect the AC power plug to a grounded wall socket or power strip. NOTE: • The notification LED turns red and charging battery icon appears on the status bar indicating that the battery is charging.
Starting up Powering your device Make sure that your MarsII is fully-charged before starting the device for the first time. To turn on power: 1. Press and hold the power button. Power button 2. Follow onscreen instructions to align screen and set the local time zone. Using the stylus The stylus is a pen-like device found behind the upper right corner of your MarsII. • Use the stylus to write, draw, select, or drag an item on the screen. • Single-tap an item to select it.
Calibrating MarsII Calibrating your device ensures that the item you tap on the screen is activated. This involves tapping in the center of targets that appear in various coordinates on the screen. To calibrate your screen: 1. Tap Start > Settings > System tab then tap Screen icon. 2. On the General tab tap Align Screen and follow succeeding calibration screen instructions. You can also invoke the calibration screen by simultaneously pressing the Mode and Clear buttons.
The Today screen The Today screen displays information useful to you. You can configure the Today screen to have all the important information you need. • To access the Today screen, tap Start > Today. • To personalize the Today screen, tap Start > Settings > Personal tab > Today. The following describes the common information found on the today screen: Tap to open the Start menu Tap to setup date, time, and alarm.
Status indicators Refer to the table below for the Today screen icon status indicators. Icon Description General Packet Radio Services (GPRS) available. Connecting via GPRS. Connected via GPRS. Connecting with ActiveSync ActiveSync connection not active. ActiveSync synchronization in progress. Call forwarded. Call in progress. Call on hold. Missed call. New message.
Status indicators Icon Description New voice mail. No cellular phone service. No signal. Searching for cellular phone service. Indicates signal strength. Sound OFF. Sound ON. Battery low. Battery partially charged. Battery charging. Battery fully charged.
Status indicators Icon Description Searching Wi-Fi connection. Wi-Fi active. Roaming. This icon appears only if you have international roaming feature. Vibrate or silent mode on. Bluetooth headset connected. Bluetooth head connected with sound. Appears when you set alarm Pocket MSN service notification. Pocket MSN chat is online.
Screen orientation You can set the screen to three different orientations: 1. Portrait 2. Landscape (right-handed) 3. Landscape (left-handed) Set to Portrait mode to get a better view or better operation of certain applications on your device. Set to Landscape when viewing pictures, video or viewing longer text files. To change the screen orientation, tap Start > Setting > System tab > Screen then select the orientation you want. You can also change the orientation by tapping the icon.
Start menu The Start menu contains various programs and applications that you commonly use. Tap Start to display the start menu items: Portrait mode Landscape mode You can also customize the items that appear in the Start menu. To do this: 1. Tap Start > Settings > Personal tab > Menus. 2. Select the check boxes of the items you want to appear in the Start menu. You can select up to seven (7) items.
Chapter 2 Entering data • Using the Input Panel • Writing and drawing on the screen • Recording voice • Using ActiveSync™ • Synchronizing with Exchange Server • Searching information • Getting Help
Using the Input Panel When you start an application or select a field that requires text, symbols, or numbers, the Input Panel icon appears on the menu bar. The Input Panel allows you to select various input methods available on your device including: Block Recognizer, Keyboard, Letter Recognizer, and Transcriber. Using the Block Recognizer The Block Recognizer allows you to use a single stroke to write letters, numbers, symbols, or punctuations, which are converted into typed text.
Using the on-screen keyboard With the on-screen keyboard, you can key in text, symbols, numbers, or other special characters when input is possible. To input text using the on-screen keyboard: 1. In an application, tap the Input Panel arrow, then tap Keyboard. 2. Key in text by tapping keys on the on-screen keyboard.
Using the Letter Recognizer With the Letter Recognizer you can write individual letters, numbers, or special characters, which are converted into typed text. To use the Letter Recognizer: 1. In an application, tap the Input Panel arrow, then tap Letter Recognizer. 2. Write letters, numbers, symbols, or punctuations in the designated writing area. • Write capital letters on the ABC (left) area of the box. • Write lower case letters on the abc (middle) area of the box.
Using the Transcriber Transcriber is a handwriting recognition program that allows you to write in cursive, print, or mixed styles. It reliably recognizes not only written text but also numbers and symbols. Make sure to write legibly. See Help for more information on the Transcriber. To use the Transcriber: 1. Start an application that accepts user input, such as Notes or Word Mobile. 2. Tap the Input Panel arrow, then tap Transcriber. To write using Transcriber (using Notes): 1.
Writing and drawing on the screen You can write or draw directly on the screen and save notes in your own handwriting. If you prefer to use your own handwriting or use drawings in your notes, set the default input mode to Writing. If you prefer text, set the default mode to Typing. To set the default input mode for Notes: 1. Tap Start > Programs > Notes. 2. From the Notes list, tap Menu > Options. 3.
Creat a voice recording You can record sound, voice, or add a recording to a note using your device. To create a voice recording using Notes: 1. Tap Start > Programs > Notes. 2. From the Notes list, tap New. 3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar. 4. Tap the record icon to begin recording. 5. Place the receiver near your mouth or source of sound. 6. Tap the stop icon when finished recording. A recording icon appears on the note. 7. Tap .
Using ActiveSync™ ActiveSync™ allows you to synchronize data in your device with data in your computer. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, provided that your cellular phone service or company is running Microsoft Exchange Server with Exchange ActiveSync. When synchronized directly with Exchange Server, you can stay up to date even when your PC is turned off.
If you wish to synchronize your device with Exchange Server through your company or service provider, obtain the name of the Exchange Server, user name, password, and domain name from your network administrator before starting the Sync Setup Wizard. To install and configure ActiveSync in your computer: 1. Insert the Microsoft companion CD that came with your device package. 2. Follow succeeding screen instructions. 3.
Synchronizing via USB You can connect to your device using the bundled USB cable to synchronize to your computer. To synchronize your device via USB: 1. After installing ActiveSync to your computer, connect the USB plug to the mini-USB connector at the bottom of the device. 2. Connect the other end of the USB cable to your computer. Upon connection, ActiveSync automatically synchronizes your device.
Synchronizing via Bluetooth You can connect your device to your computer using the Bluetooth wireless technology. To synchronize your device via Bluetooth: 1. Configure Bluetooth in your computer to support ActiveSync. Refer to the ActiveSync Help in your computer for instructions. 2. Turn on Bluetooth in your device. See “Using Bluetooth” section in Chapter 4 for details. 3. On your device, tap Start > Programs > ActiveSync. 4. From the ActiveSync screen, tap Menu > Connect via Bluetooth.
Synchronizing with Exchange Server To synchronize your device with Exchange Server: 1. From the ActiveSync menu, tap Menu > Add Server Source. 2. In the Server Address field, input the name of the server running Exchange Server then tap Next. If necessary, tap the check box This server requires an encrypted (SSL) connection.
3. Input your name, password, and domain then tap Next. 4. Tap the check boxes to select the data items that you want to synchronize with Exchange Server. To change the available synchronization settings, select a data item then tap Settings. Tap Finish when done. 5. Start the sync process.
Setting the synchronization schedule To set the synchronization with Exchange Server: 1. From the ActiveSync screen, tap Menu > Schedule. 2. Refer to the table for input details. 0 Volume Recommended setup High Select a shorter interval in the Peak times list. Low Select As items arrive option or a longer interval in the Off-peak times list. While roaming Check Use above settings while roaming. Sending messages Tap to check Send outgoing items immediately.
Searching information Using the search tool, you can search for files and other items stored in your device or the external MiniSD card. You can search by file name or by words located in various applications including the Calendar, Contacts, Excel Mobile, Word Mobile, Outlook Mobile, Help, Messages, Notes, and Tasks. You can also filter your search to files larger than 64 KB. To search for a file or an item: 1. Tap Start > Programs > Search. 2.
Getting Help You can easily find Help for using any program on the device. To get help for a program: • From the Today screen or program, tap Start > Help. A page will open with links to topics that explain how to use the program.
Chapter 3 Phone features • Using the phone • Making a call • Receiving a call
Using phone Like a standard cellular phone, you can use your MarsII to make and receive calls. You can also keep a history of calls made and received, send SMS or MMS messages, take notes while talking, call from Contacts, and copy SIM card contacts to your device. Phone pad The phone pad allows you to easily dial and access the Contacts, Call History, Speed Dial, and Phone settings. To launch the Phone pad, do any of the following: • Tap Start > Phone. • Press the talk button.
Adjusting the device volume To adjust the device volume: 1. Tap the speaker icon. 2. From the volume menu, you can: • Adjust the phone volume or device volume by moving the slider to the desired volume level. • Tap On, Vibrate, or Off to change the system and ringer volume settings. You can also adjust the device volume by pressing the volume controller keys at the left side of the device.
Making a call You can make a phone call using either the key pad or phone pad. You can also make calls directly from the Contacts, Call History, Speed Dial, or Voice Commander. Using the keypad To make a call using the keypad: 1. Enter the number of the party you wish to call, then press . 2. Talk to the called party when connected. 3. When finished, press to end the call. Using the phone pad To make a call using the phone pad: 1. Tap Start > Phone. 2.
Phone pad features Dialled numbers appear here Press to set speed dial Numeric keypad Press to display the call history Press to use video call Press to make call Press to launch Contacts list Press to launch menu Displays the current call status Press to mute Press to launch Contacts list Press to turn speaker ON/OFF Press to take notes Press to launch numeric keypad Press to use video call Press to end call Press to launch menu
Making calls from Contacts To make a call directly from Contacts: 1. Tap Start > Phone. 2. From the Phone pad, tap Contacts or press the Left soft key. You can also launch Contacts from the Today screen by tapping Contacts on the menu bar or pressing the Right soft key. 3. You can do any of the following to make a call: • Tap to select a contact, then from the Contacts list, tap Call. • Tap to select a contact, then press talk button. • Select a contact then press the talk button twice.
Using the Speed Dial With Speed Dial you can call frequently dialled numbers in a single tap. For example, if you on assign a contact to the number 2 button in Speed Dial, you can simply tap and hold the Phone pad to dial the contact’s number. To create a Speed Dial entry: 1. Make sure that entry you want to create is already in the Contacts. 2. Tap Start > Phone. 2. On the Phone pad, tap the Speed Dial button. 3. Tap Menu > New. 4. Tap a contact from the list then tap Select. 5.
Receiving a call When you receive a call, a message will appear, giving you the option to answer or ignore the incoming call. To answer or reject an incoming call: • To answer a call tap Answer, or press . • To reject an incoming call, tap Ignore, or press TIP: Long press . to switch receiver to speakerphone mode.. The following pop-up screen appears during an incoming call: • Tap Answer to receive call or • Tap Ignore to dismiss call.
Chapter 4 Wireless features • Using Bluetooth® • Using WLAN (IEEE 0 .
Using Bluetooth® Overview Bluetooth® is a short-range wireless communications technology that allows devices with Bluetooth capabilities to exchange data within a radius of about 10 meters (30 feet) without requring a physical connection. With Bluetooth enabled in your device, you can: • Connect and communicate (i.e. beam files, tasks, contacts) with other devices with Bluetooth features. • Use Bluetooth service.
Configuring Bluetooth To configure Bluetooth in your device: 1. Start > Settings > Connections tab then tap the Bluetooth icon. 2. From the Bluetooth screen, you can access the following tabs: • General - allows you to set the user profile, turn Bluetooth on or off, displays the Bluetooth status, and provides a link to the Bluetooth Manager.
Using a Bluetooth-enabled headset Mono headset setup 1. Make sure that Bluetooth is enabled on your device. 2. Tap on the Today screen then on the shortcut menu tap Bluetooth Manager. 3. From the Bluetooth Manager, tap New. 4. From the Bluetooth Connection Wizard, tap Hands-free/Headset setup then tap Next.
5. Make sure that your headset device is in pairing mode and ready to receive incoming connection requests then tap Next. 6. Tap the name of your Bluetoothenabled headset device then tap Next. 7. In Passkey, input the alphanumeric passkey of your headset device then tap . You can find this in the documentation that came with your headset device. 8. Tap Finish. You are now ready to use your headset device.
Stereo headset setup MarsII supports A2DP (Advanced Audio Distribution Profile), which is used by Bluetoothenabled stereo headsets. Make sure that your stereo headset also supports A2DP. 1. Tap on the Today screen then on the shortcut menu tap Bluetooth Manager. 2. From the Bluetooth manager screen, tap New then select High Quality Audio Setup. 3. Make sure that your stereo headset device is in pairing mode and ready to receive incoming connection requests then tap Next. 4.
5. Tap Finish to initiate connection. NOTES: • To answer a phone call using your stereo headset, make sure that you have mono and stereo connection at the same time. • To use voice commander while using a headset, press the answer button on the headset then follow given instructions. Using a Bluetooth-enabled GPS To configure a Bluetooth-enabled GPS device: 1. Make sure that Bluetooth is enable on your device. 2. Tap on the Today screen then on the shortcut menu tap Bluetooth Manager. 3.
6. Tap the name of your Bluetoothenabled GPS device then tap Next. 7. Select SPP Slave in the Service Selection list then tap Next. 8. Tap Finish. 9. Tap and hold the shortcut icon to display shortcut menu then tap Connect. 10.In Passkey, input the alphanumeric passkey of your headset device then tap OK. You can find this in the documentation that came with your headset device.
Using WLAN (IEEE 0 .11b) Introduction WLAN (IEEE 802.11b), refers to certain types of wireless local area network (WLAN) that use specifications in the 802.11 family. Created by the Wi-Fi Alliance, a nonprofit international association to certify interoperability of wireless local area network products. Any device tested and approved by the Wi-Fi Alliance are certified as interoperable with each other even if they are from different manufacturers.
Configuring WLAN To configure WLAN in your device: 1. Start > Settings > Connections tab then tap the Wi-Fi Manager icon. 2. From the Wi-Fi Manager screen, you can access the following tabs: • Wi-Fi Status • Setting • IP Info • Site Survey NOTE: Tap ? for Wi-Fi Help. Wi-Fi Status Displays the Wi-Fi status, ESSID, BSSID, BSS mode, channel, data rate, IP Address, and signal strength.
IP Info Displays the network information and allows you to renew or ping a network connection. Site Survey Shows the available wireless networks in the area.
Using Infrared (IR) You can use your device to connect to another device with infrared capabilities. To connect to another device via infrared: 1. Setup the device you want to connect to receive infrared beams. Refer to the technical documentation that came with the device. 2. Configure your device to receive infrared beams. Tap Start > Settings > Connections tab then tap Beam icon. 3. Tap to check Receive all incoming beams. 4. Tap . 5. Line up the infrared ports of both devices.
Setting a GPRS connection Your MarsII allows you to connect via General Packet Radio Service (GPRS). GPRS is a wireless communication standard that runs at speeds of up to 115 kbps, compared to 9.6 kbps of the current Global System for Mobile Communications (GSM). It supports a wide range of bandwidths that allows sending and receiving small bursts of data, such as email and web browsing. To set a GPRS connection in your device: 1. From the Start manual, tap Settings. 2.
4. From the Connections screen, tap Add a new model connection. 5. Input a unique name for the connection then select Cellular Line (GPRS) from the modem list.
6. Input the Access point name. 7. Input your user name, password, and domain then tap Finish. Contact your network administrator for assistance. NOTE: The GPRS and USB connections can not be used at the same time.
Connecting GPRS To connect GPRS: 1. Tap Start > Settings > Connections tab then tap Connections icon. 2. From the Connections screen, tap Manage existing connections. 3. Tap and hold on an existing connection then from the pop-up menu tap Connect. Tap Delete if you want to delete selected connection setting. 4. When connected, tap to exit.
If you have set a default GPRS connection, it automatically connects when you launch an application that connects to the Internet. 1. Launch any application that connects to the Internet (e.g. Internet Explorer). The device will automatically connect your default GPRS connection. A pop-up callout appears to display the connection status. Pop-up callout 2. When connected, you can start browsing the Internet. If you’re using Internet Explorer, the default site will be displayed. To disconnect GPRS: 1.
Chapter 6 Multimedia features • Using the camera • Viewing pictures and video
Using the camera The built-in two-megapixel camera allows you to take photos and record audio/video clips. Launching the camera To start using the camera: • Tap Start > Programs > Pictures and Videos > Camera icon or • Press the Camera button on the left side of your device. Camera button NOTE: • By default, the preview screen is set to landscape. • After launching the camera, your device is set to camera mode by default. • In camera mode, the camera button function as shutter button.
Joystick functions in camera mode The following describes the 5-way joystick functions in Camera mode: Up Enter/Action Button Forward Backward Down Up In camera preview mode, press for video mode. In the camera or video option menu, press to select menu items. Down In video preview mode, press for camera mode. In the video or camera options menu, press to select menu items. Backward In camera mode and if the resolution is not 1600x1200, press to zoom in.
Available capture modes Your device camera can be set to two capture modes: • Camera mode - Camera mode allows you to take photos, and save them to your device or MiniSD. You can also configure the camera to match an environment, set picture size, select magnification, adjust the picture quality, apply effects, and modify other advanced settings. • Video mode - Video mode enables you to record audio/video clips.
Camera mode screen The following describes the screen icons in Camera mode: Capture mode icon Picture quality icon Flash light status Default storage icon Scene mode icon Timer icon Burst mode status Effects icon Picture resolution Tap to close camera Tap to launch Pictures and Videos Number of available shots Tap to zoom in Capture modes: Camera mode Video mode Tap to zoom out Tap to launch camera menu
Camera mode icons • Capture mode icon [ / ] - indicates the current capture mode. • Picture quality icon [ / / / • Flash light status icon [ • Default storage icon [ videos clips. / • Scene mode icon [ ]- indicates the picture quality used. / ] - indicates the camera flash status. / ] - indicates default storage for captured images and / ] - indicates the scene mode used. / ] - when the camera timer is enabled (5 seconds or 10 seconds), the • Timer icon [ corresponding timer icon appears.
Camera options menu The camera options menu allows you to change various camera and picture settings. To launch options menu: 1. Tap Menu icon from the camera screen. NOTE: The screens in this section may not be exactly the same as what are displayed on your screen and they are only for your reference. 2. From the shortcut menu, tap an icon to display contents.
Change Mode The Change Mode option allows you to set capture mode into Camera or Video mode. Scene The Scene option allows you to select presets appropriate for a night scene or sports event. Select Auto to use best setting for any scene. Picture Size Allows you to set the frame size of picture.
Picture Quality This option provides three picture quality presets: Normal, Fine, and Super Fine. The picture quality is set to Super Fine by default. Flash Mode This option allows you to change the flash mode to suit a variety of lighting situations. Zoom Allows you to change the maximum magnification allowed.
Self-Timer Sets the delay of shutter release to 5 or 10 seconds after you have pressed the camera/shutter button.. Burst Allows you to take 4 or 9 pictures in succession by pressing the camera/shutter button only once. Frame Allows you to set a frame.
Effect The Effect option allows you to apply some effects to the subject. Select from the following configuration options: Black-White, Negative, and Sepia. Set to Normal for no effect. Save to Allows you to select the default storage for captured pictures. NOTE: Prepare a MiniSD card before setting default storage to Storage Card.
Advanced This option allows you to set the following: - Filename prefix format - Filename prefix - File number - Date and time stamp - Shutter sound - Burst interval 0
Taking photos After launching the camera, your device is set to Camera mode by default. If set otherwise, tap Menu > Change Mode > Camera Mode then tap Done. You can also set to camera mode by tapping the camera mode icon on the screen. To take a photo: 1. Aim device to your subject then half-press camera/shutter button to auto-focus on subject. While camera/shutter button is half-pressed, you can see the auto-focus frame on the center of the screen.
Other options Tap Menu to access the following options: • Save to Contact • Send via MMS • Send via e-mail Save to Contact To save to contacts: 1. Tap Menu then tap Save to contact. 2. From the Contact screen, select contact where you want the image saved then tap Select.
Send via MMS To send image via MMS: 1. Tap Menu then tap Send via MMS. 2. Key in recipient or tap To to display contact list. 3. Key in subject. 4. Tap Send. Send via Email To send image via electronic mail: 1. Tap Menu then tap Send via E-mail. 2. Key in recipient or tap To to display contact list. 3. Key in subject. 4. Key in message. 5. Tap Send.
Delete image To delete image: 1. Tap Delete icon. 2. Tap OK from the confirmation message.
Video mode screen The following describes the screen icons in Video mode: Capture mode icon Remaining video recording time Default storage icon Video resolution Tap to close camera Tap to launch Pictures and Videos Recording indicator Green: Ready Red: Recording Tap to zoom in Capture mode icons: Camera mode Video mode Tap to zoom out Tap to launch video menu
Video mode icons • Capture mode icon [ / ] - indicates the current capture mode. ] - this icon appears when the flash light is enabled. • Flash light status icon [ • Default storage icon [ • Effects icon [ / / • Picture resolution [ / / ] - indicates default storage for captured video clips. / ] - indicates the effects used. / ] - shows the resolution used. • Exit icon [ ] - tap to exit video. • Zoom In [ ] - tap to zoom in view of subject on screen.
Video options menu The video options menu allows you to change various video and playback settings. To launch video options menu: 1. Tap Menu from the video screen. NOTE: The screens in this section may not be exactly the same as what are displayed on your screen and they are only for your reference. 2. From the shortcut menu, tap an icon to display contents.
Change Mode The Change Mode option allows you to set your device into Camera or Video capture mode. Zoom Allows you to change the maximum magnification allowed. Video Size Allows you to set the frame size of video.
Flash Mode This option allows you to change the flash mode to suit a variety of lighting situations. Save to Allows you to select the default storage location for captured pictures. NOTE: Prepare a MiniSD card before setting default storage to Storage Card.
Effect The Effect option allows you to apply some effects to the subject. Select from the following configuration options: Black-White, Negative, and Sepia. Set to Normal for no effect.
Recording videos Set the device to video capture mode to record videos. To set video mode: • Tap Menu > Change Mode > Video Mode then tap Done. • You can also set the video mode by tapping the video mode icon on the screen as shown. Video mode icon To record video: 1. Aim device to your subject then half-press camera/shutter button to auto-focus on subject. While camera/shutter button is half-pressed, the auto-focus frame appears on the center of the screen.
2. Full-press the camera/shutter button to begin recording. The record indicator turns from green to red while video is recording. 3. Full-press the camera/shutter button again to stop recording. Record indicator 4. Tap Camera to go back to camera screen. 5. Repeat steps 1 to 4 to record another video. NOTE: • The video clip is automatically saved to the default storage location. • Use Windows Media Player Mobile to playback video clip in your device.
Other options Tap Menu to access the following options: • Send via MMS • Send via E-mail • Play Send via MMS To send video via MMS: 1. Tap Menu then tap Send via MMS. 2. Key in recipient or tap To to display contact list. 3. Key in subject. 4. Tap Send.
Send via Email To send video via electronic mail: 1. Tap Menu then tap Send via E-mail. 2. Key in recipient or tap To to display contact list. 3. Key in subject. 4. Key in message. 5. Tap Send. Play To play video: 1. Tap Menu then tap Play. 2. Tap to exit.
Delete To delete video: 1. Tap Delete icon. 2. Tap OK from the confirmation message.
Viewing pictures and video Use the Pictures and Video Application to preview stored images and playback video clips. Viewing pictures and video To view pictures and video: 1. Tap Start > Programs > Pictures and Videos. 2. Tap the picture or video clip you want to see. • To view pictures or launch video clips stored in MiniSD card, tap the folder list (labeled My Pictures), and tap MiniSD Card. • To view pictures stored in My Pictures folder on your device, tap My Pictures then tap picture thumbnail.
Chapter 7 Device components Status
System information The System Information contains important device information including the current device settings and version. To launch the System Information: 1. Tap Start > Settings > System > System Information icon. 2. Tap the Device Info tab for device hardware information. 3. Tap Version tab to display the ROM, Boot, Radio, MP and Battery version.
CPU mode setting Allows you to select the CPU mode (Turbo, Standard, Power Saving). To launch the CPU mode setting: Tap Start > Settings > System > CPU Mode icon. Tap to check Automatic Mode to automatically change the CPU speed according to the CPU loading. USB setting Allows you to set the USB connection mode. To launch the USB setting: Tap Start > Settings > Connections > USB settings icon.
LCD Brightness Adjusts the LCD brightness on battery power and external power. To launch the LCD Brightness setting: Tap Start > Settings > System > Brightness icon. Power Displays the battery power status. To launch the Power setting: Tap Start > Settings > System > Power icon.
Memory Displays the total, in use and free memory. To launch the Memory setting: Tap Start > Settings > System > Memory icon. Storage card memory Displays the total, in use, and available storage card memory. To launch it: Tap Start > Settings > System > Memory > Storage Card tab.
Programs running in memory Allows you to activate or stop any program running on memory. To launch it: Tap Start > Settings > System > Memory > Running Programs tab. IMPORTANT: When you exit a running program, you are actually only minimizing it and the program remains in the memory. You can stop these programs from running in the background using this option. Settings Allows you to select the items to display in the pop-up menu. To launch it: Tap Start > Settings > Personal > Menus icon.
Appendix • Notices • Contact information 10
Notices Replaceable batteries If an equipment is provided with a replaceable battery and if replacement by an incorrect type could result in an explosion (e.g.
Operator access with a tool If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access. An acceptable marking for an electric shock hazard is (ISO 3864, No. 5036).
WARNING The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. For FCC PCS Head: 0.369 mW/g PCS Body: 1.01 mW/g WLAN Head: 0.00437 mW/g WLAN Body: 0.00203 mW/g For DGT & CE GSM Head: 0.166 mW/g DCS Head: 0.223 mW/g WCDMA Head: 0.
Declaration 10
Contact information 10
FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
