User's Manual

3-10 Chapter 3: Setting up
3.3 Customized setup
If you are familiar with wireless network settings, you can configure the
WiFi-g™ using the Customized (Office and Advanced Users) option in
the setup wizard.
To setup the WiFi-g™ using the customized option:
1. Launch the setup wizard
following the instructions in
section 3.2.1.
2. When the setup wizard welcome
window appears, select Create
a new wireless LAN (AP) from
the Operation Mode field, then
select Customized (Office and
advanced users).
3. Click Next.
4. The wizard displays the
computer SSID and channel
information. Click Next.
By default, the wizard
selects the channel with the
clearest signal. To change
this, uncheck the Auto
Channel Selection, then
select a channel from the
drop-down list.
5. Set the Network
Authentication to Open,
Shared, or WPA-PSK. Refer to
the table on the next page for a
comparison of network
authentication methods.