User's Manual

112
Adding a wireless network
If the device fails to automatically detect the wireless network you want to connect to, you can manually
add a network. Ask for the wireless network settings from your network administrator.
To add a wireless network:
1. To launch the Wi-Fi settings page, you can either:
• Tap > Settings > Connections tab > Wi-Fi.
• Tap from the status bar, then tap Settings > Wi-Fi.
Then tap
Add New... from the Wireless tab.
2. Enter a name for the network and select an item from the
Connects to: drop-down menu. Then tap
Next.
3. Set authentication, data encryption, and network key. Ask your network administrator for these
information. Then tap Next.
NOTE: Obtain the authentication, data encryption, and network key from your network administrator.
4. If you need to change the EAP type, check the check box and then change the EAP type.
5. Tap
Finish when done.