User's Manual

3-1
Chapter 3
Getting connected
Connecting to the Internet
Wired connection
Use an RJ-45 cable to connect the EeeKeyboard PC to an ADSL modem
or a local area network (LAN).
Connecting via an ADSL modem
To connect via an ADSL modem:
1. Connect one end of the RJ-45 cable to the LAN port of the ADSL
modem and the other end to the LAN port at the back of the
EeeKeyboard PC.
2. Turn on the ADSL modem and the EeeKeyboard PC.
Connecting via the Local Area Network (LAN)
To connect via LAN:
1. Connect one end of the RJ-45 cable to your LAN and the other
end to the LAN port at the back of the EeeKeyboard PC.
2. Configure the Internet connection settings using a dynamic or static
IP address.
• Refer to the succeeding sections to configure the Internet
settings using a dynamic or static IP address.
• If you have difficulty connecting to the Internet via LAN,
contact your network administrator.