User's Manual

3-6
Chapter 3: Getting connected
13. Enter your user name and
password. Click Connect to
connect to the Internet.
Using a static IP address
To use a static IP address:
1. Repeat steps 1–3 in the section Using a dynamic IP.
2 Click Use the following IP address.
3. Key in the IP address, Subnet mask, and Gateway. Get these
information from your ISP or from your network administrator.
4. If needed, enter the preferred DNS Server address and alternative
address.
5. After entering all the related values, click OK to establish the
connection.
Contact your Internet Service Provider (ISP) or your network
administrator if you have problems connecting to the network.