2 3 4 HDMI port Insert the bundled HDMI cable into this port to connect high-definition multimedia devices. Power (DC) Input Insert the AC adapter into this port to supply power to the Ultra Wideband receiver. Mini-USB port Insert the mini-USB cable into this port to connect the Ultra Wideband receiver to the EKB PC. Getting your EKB PC ready Turning the battery ON/OFF Out of the box, the built-in battery is set to OFF mode to prevent the EKB PC from accidentally turning ON during transport.
Charging the battery Ensure that the battery is turned on before charging it. To charge the battery: 1. Connect the AC power cord to the AC adapter. 2. Connect the AC adapter to the DC-in port at the back of your EKB PC. 3. Connect the AC adapter to a power outlet. • Use only the AC adapter that comes with your EKB PC. Using a different AC adapter may damage your device.
Starting up When you use the EKB PC for the first time, a startup message is displayed to guide you in configuring the basic settings for your EKB PC. To start up: 1. 2 Press the Power button for about two seconds and wait until the operating system load automatically. At system startup, the calibration screen appears. Using the stylus, tap and hold the red dot ( • ) as it moves on each crosshair (+) to calibrate the touch panel.
Turning your EKB PC ON/OFF Turning your EKB PC ON To turn on your EKB PC: 1. Press the Power button for about two seconds and wait for the operating system to load automatically. 2. ESC F2 F1 F3 2 1 W F5 F4 4 3 Q F6 F8 F7 7 6 5 R E T V S Z D X F C G 8 V B 6 K 1_ 2 M 0 : ; L 3 < , > Prt Sc SysRq Insert Num LK Delete Scr LK - / P O 5 F12 F11 0 9 I J N 9 8 U H F10 F9 7 4 A { } \ [ ] | “ ‘ ? .
Managing power usage With the Super Hybrid Engine utility, you can control and manage the power usage while maximizing the performance of your EKB PC. Changing the power mode To change the power mode: • Press the Start button , then select All Programs > ASUS > EeePC > SuperHybridEngine. • Press + to switch power modes. Power modes Auto High Performance and Auto Power-Saving mode are available only when you plug in or remove the power adapter.
Connecting devices With its connection ports at the rear panel, connect USB devices such as cameras, storage devices, PDAs, printers, and scanners; Highdefinition multimedia devices such as Blu-ray disk drives, digital audio devices, computer monitor, and HDTV; and VGA-compatible devices such as a monitor or projector to allow viewing on a larger external display.
HDMI port 2. Turn on the EKB PC and the external monitor. 3. On the EKB PC, press + ( +< F8>) to toggle from the EKB PC touch panel to the external monitor. 4. On your EKB PC touch panel, the Easy Mode screen is displayed. Use the Easy Mode screen to launch various applications on your external monitor and to configure various settings.
Connecting a projector Use the EKB PC as a business tool in creating and presenting seminars, trainings, or other business presentations. To connect a projector: 1. Connect a VGA cable to the VGA port at the back of the EKB PC. A VGA cable is purchased separately. 2. Turn on the EKB PC and the projector. 3. On the EKB PC, press + ( + ) to toggle between the EKB PC touch panel and the projector's LCD display. On your EKB PC touch panel, the Easy Mode screen is displayed.
Connecting an HDTV To connect an HDTV: 1. Connect the bundled HDMI cable to the HDMI port at the back of the EKB PC. 2. Turn on the EKB PC and the external monitor. 3. On the EKB PC, press + ( +< F8>) to toggle from the EKB PC touchsreen panel to the external monitor. 4. On your EKB PC touch panel, the Easy Mode screen is displayed. Use the Easy Mode screen to launch various applications on your external monitor and to configure various settings.
Setting up your Ultra Wideband connection With the Ultra Wideband receiver, the EKB PC allows you to wirelessly connect to a high-definition device such as an audio device or an external monitor that is within a five-meter range for 720P highdefinition video transmission and ten-meter range for non-video transmission. Creating a wireless pairing If you are using the Ultra Wideband function for the first time, create a wireless pairing between the Ultra Wideband receiver and the EKB PC.
4. From the Easy Mode screen, tap the Ultra Wideband icon the upper right corner of the screen, then tap ON. at 5. Select the Ultra Wideband receiver to establish the Ultra Wideband connection. The Ultra Wideband LED turns white to indicate a successful connection. If the Ultra Wideband receiver failed to establish connection, check if the Ultra Wideband receiver is turned ON and the wireless antenna is connected, then try again.
Connecting an external monitor wirelessly Ensure that you have set up the Ultra Wideband connection between your EKB PC and the Ultra Wideband receiver. For more details, refer to the section Creating a wireless pairing. To connect an external monitor wirelessly: 1. Connect the wireless antenna to the wireless antenna ports at the back of the EKB PC. 2. Insert the AC adapter into the DC-In port of the Ultra Wideband receiver and plug the AC adapter into a power outlet. 3.
Connecting two external monitors To connect two external monitors: 1. Connect one external monitor wirelessly. Refer to the section Connecting an external monitor wirelessly. The Ultra Wideband receiver should be positioned within a clear line of sight to and facing the wireless antenna. 2. Using a VGA or an HDMI cable, connect the external monitor to the VGA or the HDMI port at the back of the EKB PC. Refer to the section Connecting an external monitor in this user manual.
You cannot connect two external monitors using VGA and HDMI cables at the same time. 3. On the EKB PC, press + ( +< F8>) to toggle from the EKB PC touch panel to the external monitors. Connecting a USB mouse To connect a USB mouse: • Connect the USB plug of your USB mouse to a USB port on your EKB PC. For details on connecting a Bluetooth mouse, refer to the section Adding Bluetooth devices in Chapter 3 of this user manual.
Connecting an external ODD To connect an external ODD: • 1-20 Connect one end of the ODD USB cable to the port USB at the back of the ODD and the other end to a USB port on your EKB PC.
Chapter 2 Using your EKB PC The Easy Mode Screen With the tap of the stylus on the screen, the Easy Mode screen enables you to quickly access the Internet, view your photos in slideshow format, play songs on your playlist, view your videos, and launch MSN Messenger or Skype..
1 2 3 4 5 6 7 Shortcuts Tap this icon to quickly access to your commonly-used applications. To add/remove shortcut items, tap at the top left corner of your screen/ Web Tap this icon to quickly access to popular online messaging, social networking, and e-mail services websites. Fun Quick access to media/video players and games. Tools & Setting Quick access to various tools to help you configure various settings. Learning Quick access to learning applications.
Using the keypad The keys on the keypad vary with country/region. Function keys Use the Function key perform an action. + + combined with another specific key to Sleep: Puts the system on Sleep Mode. Wireless/Bluetooth: Toggles the internal wireless LAN or Bluetooth ON or OFF. When enabled, the corresponding wireless indicator lights up. The default setting is WLAN ON / Bluetooth OFF. + Brightness down: Decreases the display brightness. + Brightness up: Increases the display brightness.
