User's Manual

ManualsBrandsASUSTeK Computer ManualsElectronics802.11n all-in-1 WIRELESS ADSL2/2+ HOME GATEWAY

® 802.11n All-in-1 Wireless ADSL2/2+ Home Gateway DSL-N13

User Manual

June 2007

Manufacturer Contact Information

ASUSTeK COMPUTER INC. (Asia-Pacific)

Company address: 15 Li-Te Road, Beitou, Taipei 11259

General (tel): +886-2-2894-3447 Web site address: www.asus.com.tw

General (fax): +886-2-2894-7798 General email: info@asus.com.tw

ASUS COMPUTER INTERNATIONAL (America)

Company address: 44370 Nobel Drive, Fremont, CA 94538, USA

General (fax): +1-510-608-4555 Web site address: usa.asus.com

Technical support

General support: +1-502-995-0883 Support (fax): +1-502-933-8713

Online support: http://vip.asus.com/eservice/techserv.aspx

ASUS COMPUTER GmbH (Germany & Austria)

Company address: Harkort Str. 25, D-40880 Ratingen, Germany

General (tel): +49-2102-95990 Web site address: www.asus.com.de

General (fax): +49-2102-959911 Online contact: www.asus.com.de/sales

Technical support

Components: +49-2102-95990 Online support: www.asus.com.de/support

Notebook: +49-2102-959910 Support (fax): +49-2102-959911

DSL-N13 802.11n All -in -1 Wireless ADSL2/2+ Home Gatway User Manual

Table of contents

Package contents............................................................................3

Setup Process Overview ...............................................................4

Hardware overview..........................................................................5

Front panel........................................................................................5

Rear panel........................................................................................6

Product features................................................................................6

Hardware connections......................................................................7

Connecting to the Internet..............................................................8

Before you start.................................................................................8

Preparing your WAN.........................................................................8

Preparing your LAN..........................................................................8

Quick setup.....................................................................................10

Manual Setup..................................................................................12

EZSetup..........................................................................................16

Summary of content (20 pages)

PAGE 1
® 802.11n All-in-1 Wireless ADSL2/2+ Home Gateway DSL-N13 User Manual June 2007 Manufacturer Contact Information ASUSTeK COMPUTER INC. (Asia-Pacific) Company address: 15 Li-Te Road, Beitou, Taipei 11259 General (tel): +886-2-2894-3447 Web site address: www.asus.com.tw General (fax): +886-2-2894-7798 General email: info@asus.com.tw ASUS COMPUTER INTERNATIONAL (America) Company address: 44370 Nobel Drive, Fremont, CA 94538, USA General (fax): +1-510-608-4555 Web site address: usa.asus.
PAGE 2
Connecting DSL- N13 with ASUS WLAN Card................................20 Wireless settings...........................................................................22 Setting up SSID..............................................................................22 Setting up wireless security............................................................22 MAC filter........................................................................................27 Wireless bridge.......................................
PAGE 3
DSL-N13 802.11n All -in -1 Wireless ADSL2/2+ Home Gatway User Manual 3 FCC Warning Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 4
• DSL-N13 Wireless ADSL2/2+ Home Gateway • AC power adapter 12.0V/1.25A. (type varies by region)Model No: Leader Electronics MU18-2120125-C5 Leader Electronics MU18-2120125-A1 Leader Electronics MU18-2120125-B2 Leader Electronics MU18-2120125-A3 • Category 5 (Cat. 5) Ethernet cable • Telephone cable • Splitter (type varies by region) • Support CD (with electronic user manual included) • Quick Start Guide DSL-N13 802.
PAGE 5
DSL-N13 802.11n All-in -1 Wireless ADSL2/2+ Home Gatway User Manual 6 Rear panel Viewed from left to right, the rear panel of DSL-N13 contains the following elements: • ADSL port • Power connector • Power switch • Four Local Area Network (LAN) ports • USB 2.0 ports • EZSetup button • Reset button • Integral antenna PWR AIR WAN LAN 3) Wall mount option Out of the box, ASUS DSL-N13 Wireless Router is designed to sit on a raised flat surface like a file cabinet or book shelf.
PAGE 6
The format of the connector on the supplied splitter (line or plug) may differ by region. Ethernet connection Use Category 5 (CAT5) Ethernet cable to build up your wired LAN connections. The ASUS DSL-N13 Wireless ADSL2/ 2+ Home Gateway is a Fast Ethernet device that provides 100Mbps network connection. To ensure the connection quality, use CAT5 Ethernet cable to connect your network devices, such as desktop computers and network printers.
PAGE 7
Assigning IP address manually Open Control Panel -> Local Area Network Connection, double-click Local Connection icon, then double-click Internet Protocol (TCP/IP) . Follow the descriptions below to setup the TCP/IP on your computer. • IP address: 192.168.1.xxx (xxx can be any number between 2 and 254, make sure the IP address is not used by other device) • Subnet Mask: 255.255.255.0 • Gateway: 192.168.1.1 • DNS: 192.168.1.
PAGE 8
Manual Setup If you encounter any difficulty configuring your ADSL connection with Quick Setup, click Manual Setting to manually set up your DSL-N13. ADSL Setup 1. Select your Country and ISP and click Next. 2. If your country and ISP are not on the list, select Not list, key in your VPI and VCI values and click Next. You may ask your ISP for VPI/VCI values. 3. Select your connection type and click Next. You can get the connection type from your ISP.
PAGE 9
6. Next, EZSetup will guide you to complete the Internet connection settings. Check Configure ISP settings then click Next to continue. 7. The system detects your Internet connection type. The progress may take several seconds. If your ADSL connection is successfully detected by DSL-N13, skip to Step 8. If your ADSL connection can not be detected, you need follow Step 8 and manually set up your ADSL connection. 8. Select your country and ISP then click Next.
PAGE 10
To protect your wireless network, you need to setup a security mechanism at both DSL-N13 and the wireless clients. Network authentication Network authentication uses certain types of mechanism to identify authenticated wireless clients. DSL-N13 supports the following authentication methods: Open: This option disables authentication protection for your wireless network. Under the Open mode, any IEEE802.11b/g wireless client can connect to your wireless network.
PAGE 11
802.1X 1. Click Wireless -> Security in the left side menu to open the configuration page. 2. Select 802.1X in the Network Authentication field to enable authentication using RADIUS server in your network. 3. Input the RADIUS Server IP address, RADIUS port (the default value is 1812), and RADIUS Key. 4. You can choose to enable or disable data encryption. If you want to encrypt data, select Enable in the WEP Encryption field, select 64-bit or 128-bit Encryption Strength for key length.
PAGE 12
1. Using the same encryption. 2. Working on the same channel. 3. The IP addresses of all wireless bridges are within the same subnet. 4. WDS enabled. 5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must be saved to the Remote Bridge List. For uplink wireless router, MAC addresses of all bridging router must be saved. Example: DSL-N13 (wireless bridge with Internet access), WL-500gP (wireless bridge), and WL-500gD (wireless bridge).
PAGE 13
Wireless advanced settings Click Wireless -> Advanced to configure advanced features of the wireless router such as communication channel, data rate and WMM. If you do not know the meaning of these items, use the default setting. Network security This chapter shows how to set up security defence for your local area network.
PAGE 14
hosts and servers. DSL-N13 supports up to 32 virtual server entries. To set up virtual server: 1. Click Advanced Setup -> NAT -> Virtual Server in the left side menu to open the configuration page. Click Add to create a new rule. 2. Select the service you want to configure and let the system automatically fill in the external and internal port number and protocol type. You can also select Custom Server radio button to designate a certain known server. 3.
PAGE 15
1. Click Advanced Setup -> Security -> Parental Control in the left side menu to open the configuration page. Click Add to create a new rule. 2. Fill in the username to whom you want to apply the restriction. 3. Fill in the MAC address of the restricted host. If you are accessing this configuration at the computer of restricted host, select Browser's MAC Address radio button. The system automatically detects the MAC address of the configuration console.
PAGE 16
DDNS acount request procedures 1. Type www.DynDNS.org to the address box of your Web browser and press Enter. Read the policy and select "I have read...". 2. Enter your user name, e-mail address, password, then click Create Account . 3. A message prompts out asking you to check your mailbox for the activation letter. Open your mailbox and read the mail. 4. You can find the letter in your E-mail box. Click the hyperlink. 5. The link directs you to a login page. Click login. 6.
PAGE 17
RIP stands for Rounting Information Protocol. DSL-N13 supports RIPv1 and RIPv2. 1. Click Advanced Setup -> Routing -> RIP to open the configuration page. 2. To activate RIP, select Enabled radio button for global RIP mode. 3. To configure an individual interface, select the desired RIP version and operation and check the Enabled checkbox for the interface. 4. Press Save/Apply to save and activate the settings. USB applications DSL-N13 offers two USB2.
PAGE 18
and login. Sharing USB printer You can plug your USB printer to the USB2.0 port of DSL- N13 to share it within your LAN. After you plug a printer to the USB port, you can see the status of printer by clicking USB Application -> Printer Status . Setting up printer client under Windows XP Follow the steps below to install network printer on your clients. 1. Run Add Printer Wizard from Start -> Printers and Faxes -> Add a printer. 2. Select Local printer attached to this computer and click Next. 4.
PAGE 19
IP phone and other A/V applications on DSL-N13 If you would like to have better voice over IP and other A/V application quality, just click on the VoIP/Video Streaming icon. You can then enjoy uninterrupted VoIP quality and smooth multimedia downloading. From the bar chart at the bottom of the web page, you can see that the VoIP/Video application now takes most of DSL-N13's network resource. User Specified Service Setting up VoIP / Video application priority by indicating ports and IP addresses.
PAGE 20
2. Drag the scroll bar to your desired packet size. The smaller the packet size, the less network latency. With Long Packet Fragmentation enabled, users may have problem logging onto the XBOX Live or other gaming servers due to the servers’ limitation on their incoming packet size. For more information, refer to the Asus website at http://www.asus.com Management This chapter describes how to maintain your DSL-N13 wireless ADSL router.