User's Manual

2. Select TCP/IP Protocol from the Network Protocols list then click Properties.
3. From the IP Address tab of the Microsoft TCP/IP Properties window, you can:
• Select the type of network adapter installed in your system.
• Set the router to assign IP address automatically.
• Manually set up the IP address, subnet mask, and default gateway.
17 Chapter 3: Configuring the clients DSL-N11
4. Select the DNS tab then click Add under the DNS Service Search Order and key in DNS.
Windows ® 2000
1. Click Start > Control Panel > Network and Dial-up Connection. Right-click Local Area Connection
then click Properties.
18 DSL-N11 Chapter 3: Configuring the clients
2. Select Internet Protocol (TCP/IP), then click Properties.
3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically.
Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default
gateway.
4. Select Obtain an IP address automatically if you want the DNS server settings to be assigned
automatically. Otherwise, select Use the following DNS server address: and key in the Preferred and
Alternate DNS server.
5. Click OK when done.
Windows ® XP
1. Click Start > Control Panel > Network Connection. Right-click Local Area Connection then select
Properties.
19 Chapter 3: Configuring the clients DSL-N11
2. Select Internet Protocol (TCP/IP), then click Properties.
3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically.
Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default
gateway.
4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned
automatically. Otherwise, select Use the following DNS server addresses: and key in the Preferred
and Alternate DNS server.
5. Click OK when done.
0 DSL-N11 Chapter 3: Configuring the clients
Windows ® Vista
1. Click Start, select Control Panel > Network and Sharing Center. Right-click Local Area Connection
then select Properties.
2. Select Internet Protocol Version 4(TCP/IPv4), then click Properties.
3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically.
Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default
gateway.
4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned
automatically. Otherwise, select Use the following DNS server addresses: and key in the Preferred
and Alternate DNS server.
5. Click OK when done.
We recommend that you set the router's IP address as the default gateway.
1
Chapter 4: Configuring via the web GUI DSL-N11
4