User's Manual

4011350 Rev A 71
How Do I Configure the Wireless Home Gatewa
y
?
Field Name Description
Static IP Address Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Note: When setting a static IP address, you must enter
the IP address, subnet mask, and default gateway
before the static IP address will become operational.
Static IP Mask Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Default Gateway Manual entry is required, your ISP will provide the
information for you to enter into this field.
Primary DNS
(static IP only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Secondary DNS
(static IP only)
Manual entry is required. Your ISP will provide the
information for you to enter into this field.
Function Keys
The following function keys appear on the Setup Basic Settings - Network
Configuration page.
Key Description
Renew WAN IP
Address Lease
Forces a release and renewal of your WAN IP address
Apply Saves the values you enter into the fields without
closing the screen
Configuring and Managing IP Addresses
Use the Setup Basic Settings - IP Management page to configure how your system
manages and assigns IP addresses in your network.
Note: If you are not familiar with the IP management procedures detailed in this
section, contact your cable service provider before you attempt to change any of the
wireless home gateway default IP management settings.
Click LAN IP Address Management in the Basic Settings section of the Setup page
to access the Setup Basic Settings - IP Management page.