User's Manual

70 4011350 Rev A
How Do I Configure the Wireless Home Gateway?
Setup Basic Settings - Network Configuration Page Description
The following table provides a description of the fields within the Setup Basic
Settings - Network Configuration page.
Field Name Description
LAN IP Address Displays the base IP address of the private home LAN
and the WebWizard IP address. Your wireless home
gateway assigns private IP addresses to your attached
computers by its internal dynamic host configuration
protocol (DHCP) server
MAC Address Displays the MAC address for the WAN. The factory
assigned MAC address for the WAN is also referred to
as the WLAN Data MAC
WAN IP Address Displays the public IP address assigned to your
gateway by your ISP. The WAN port will be assigned a
public IP address automatically by your ISP except
when a static IP address is set up as described below.
The WAN IP address will be shared by all the PCs in
your private local area network to access the Internet
Subnet Mask Displays the subnet mask for your WAN port. This
address is automatically assigned to your WAN port by
your ISP except when a static IP address is set up as
described later in this table
Gateway IP Displays a Gateway IP address for your WAN port.
This address is automatically assigned to your WAN
port by your ISP except when a static IP address is set
up as described later in this table
Duration Displays the length of time your WAN IP address is
valid
Expires Displays the date and time your WAN IP address
expires
Host Name Displays the host name that is usually downloaded to
your gateway by your ISP. However, some ISPs require
this information to be entered manually. If manual
entry is required, your ISP will provide the information
for you to enter into this field.
Domain Name Displays the domain name that is usually downloaded
to your gateway by your ISP. However, some ISPs
require this information to be entered manually. If
manual entry is required, your ISP will provide the
information for you to enter into this field.