User's Manual

60 4011350 Rev A
How Do I Configure the Wireless Home Gateway?
Advanced Settings
The following table provides a description of the pages available from within the
Advanced Settings section of the Setup page.
Field Name Description
Options Use this page to enable or disable advanced features
on your network
IP Address Filtering Use this page to configure IP address filters. These
filters prevent designated IP addresses from accessing
the Internet
MAC Address
Filtering
Use this page to configure MAC address filters. These
filters prevent designated MAC addresses from
accessing the Internet
Port Filtering Use this page to configure transmission control
protocol (TCP) and user datagram protocol (UDP) port
filters. These filters prevent a range of TCP/UDP ports
from accessing the Internet
Port Forwarding Use this page to configure port forwarding for local IP
addresses. Port forwarding allows you to run a server
on the local area network (LAN) by specifying the
mapping of TCP/UPD ports to local PCs or to the IP
address of other devices. This is a static setting that
holds the ports open at all times
Port Triggers Use this page to configure TCP/UPD port triggers.
Port triggering is similar to port forwarding, but is a
dynamic function. In other words, the ports are not
held open, and the ports close if no outgoing data is
detected on the selected ports for a period of 10
minutes