User's Manual

4011350 Rev A 15
Back Panel Description
Back Panel Description
The following illustration shows the description and function of the back panel
components on the DPC2434.
CABLE
CABLE
CABLE
USB
USB
USB
TELEPHONE
TELEPHONE
TELEPHONE
1
1
1
2
2
2
RESET
RESET
RESET
1 2 3 7654 T11930
Important! Do not connect your PC to both the Ethernet and USB ports at the same
time. Your modem will not function properly if both the Ethernet and USB ports are
connected to your PC at the same time.
1 POWER—Connects the wireless home gateway to the AC power plug
that is provided with your wireless home gateway
CAUTION:
Avoid damage to your equipment. Only use the AC power cord that is
provided with your cable modem.
2 CABLE—F-Connector connects to an active cable signal from your cable
service provider
3 USB—12 Mbps USB port connects to the USB port on your PC
4 ETHERNET—Four RJ-45 Ethernet ports connect to the Ethernet port on
your PC or your home network
5 TELEPHONE 1 and 2—RJ-11 telephone ports connect to home telephone
wiring to conventional telephones or fax machines