ASUS DL101 User Manual E10650 First Edition October 2015
COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Table of Contents Contents Package contents Product overview Front View........................................................................................................................... 5 Back View............................................................................................................................ 6 Safety notices.................................................................................................................... 8 Getting started Determining door status.....
Package contents NOTE: • If any of the following items is damaged or missing, contact your retailer. • The illustrated items below are for reference only. • Specifications subject to change without notice. OPEN ASUS DL101 interior unit cover ASUS DL101 exterior unit 4 Deadbolt ASUS DL101 interior unit Bag of screws Strike plate Four 1.
Product overview Front View Touchscreen panel Keyhole NOTE: Use your palm to touch the touchscreen panel, or place your finger on the NFC logo for at least 1 second to activate the keypad.
Back View Battery compartment Join button Reset button LED status indicator Thumbturn lever NOTE: Refer to LED information section for more details on the LED status indicator.
LED information The LED status indicator helps identify the current status of your ASUS DL101.
Safety notices • Replace all batteries immediately when the low-battery warning sounds. • DO NOT mix old batteries with new batteries. • DO NOT mix batteries from different brands. • DO NOT mix alkaline and carbon-zinc batteries. • Insert the batteries according to the correct polarity. • DO NOT attempt to repair the product yourself. • Change your codes regularly. • Minimize the exposure to moisture including wet hands and direct contact with liquids.
Getting started Determining door status Take note of which direction your door will be opened before installing your ASUS DL101, the orientation will be different for left-handed doors and right-handed doors. Left-handed door when viewed from the outside. Right-handed door when viewed from the outside. Setting lock direction Enter master password (default: 0000) then press Press <0> then press NOTE: Set the lock direction after your ASUS DL101 is installed.
Preparing your door NOTE: The installation steps shown in this manual is for a left-handed door and for reference only. 1. Adjust the lockbolt length to fit your door by rotating it clockwise or anticlockwise. 2 - 3/4”(70mm) 2. 10 Attach the drilling template to the door and mark it with a pen.
3. Drill the cross bore hole and bore hole as indicated on the template. NOTE: The center of the cross bore hole will vary per thickness of the door. 4. Insert the deadbolt into the door and mark the face plate.
4. Chisel out a 4 mm recess for the face plate along the marked lines. 5. Insert the deadbolt again and close the door, then mark the door frame with the lock bolt and the face plate. 6. Chisel out a 2 mm recess for the strike plate along the marked lines, then drill a hole deep enough for the locking bolt (at least 2.5 mm).
Installing your ASUS DL101 NOTE: The installation steps shown in this manual is for a left-handed door and for reference only. 1. Insert the strike plate into the door frame, then secure it with the bundled short screws. 2. Insert the deadbolt into the door, then secure it with the bundled short screws.
3. 14 Align the blade and insert it into the cross shaped opening on the deadbolt, then pass the cable through the opening on top of the deadbolt.
4. Align the mounting plate and install it, then secure the mounting plate with the bundled long screws. NOTE: Ensure to pass the blade through the blade opening, and pass the cable through the cable opening.
5. Locate the opening labeled OPEN on the cover, then insert your key into the opening and tilt it downwards to release the cover.
6. Connect the cable of the exterior unit to the interior unit, then align the interior unit and install it. NOTE: • Ensure to connect the cable in the correct orientation (black to black and red to red). • Ensure that the thumbturn lever is in the open position.
7. Secure the interior unit with the bundled medium screws, then install four 1.5V AA batteries and the cover. NOTE: Ensure the batteries are installed in the correct polarity.
Connecting to your ASUS Smart Home 1. Remove the cover on your interior unit. 2. Launch the ASUS Smart Home companion app. 3. Navigate to the Add Device page and tap Add Device. 4. Locate the Join button on your device. 5. Short press the Join button and follow the onscreen instructions. NOTE: Ensure that your device is within 50 meters of your HG 100, and there are no obstructions such as thick solid walls or other electronic devices that may cause interference.
Unlocking the ASUS DL101 You can unlock the ASUS DL101 with a user password, one time password (OTP), user card, key, or the companion app. When an incorrect password has been entered for five times, the alarm in the ASUS DL101 will go off, the touchscreen panel will be locked for two (2) minutes, and a warning message will be sent to all the family members connected to the HG 100.
Unlocking with a key Insert your key into the keyhole Turn the key Unlocking with a password Touch the panel Press the illuminated numbers (two to four numbers) 1 2 3 4 5 6 7 8 9 Enter user password OK 0 Press Unlocking with a user card Touch the panel Touch the panel with your user card Unlocking with the companion app Launch the ASUS Smart Home companion app Navigate to the ASUS DL101 device Move the slider to unlock 21
Locking the ASUS DL101 Locking with a key 1 Insert your key into the keyhole 4 2 5 3 Turn the key 6 Locking 7 with8 the touch 9 panel OK Touch the panel 0 Press Locking with the companion app Launch the ASUS Smart Home companion app Navigate to the ASUS DL101 device Move the slider to lock Locking automatically You can set the ASUS DL101 to automatically lock after it is closed for thirty (30) seconds. NOTE: Refer to Setting locking mode section for more details on setting the locking mode.
Programming the ASUS DL101 The ASUS DL101 can register one (1) master password and nine (9) passwords (user password, one time password (OTP), and user card). You can also configure the settings of the DL101 to suit your needs. NOTE: When the ASUS DL101 is unlocked, touch the panel, then press to enter programming mode.
Setting a new user card Enter master password (default: 0000) then press Press <2> then press Touch the panel with your user card then press Panel will show the slot number this card occupies NOTE: • The ASUS DL101 supports user cards with MIFARE, Felica, and smartphones with NFC. • NFC function on Android smartphones vary per manufacturer, download the ASUS Smart Door Lock app to help set up your smart phone for the first time.
Deleting an user card Enter master password (default: 0000) then press Press <3> then press Enter card slot number you want to delete then press Deleting all user passwords and user cards Enter master password (default: 0000) then press Press <4> then press Setting an one time password (OTP) Enter master password (default: 0000) then press Press <5> then press Enter OTP password (four to ten digits) then press NOTE: • You can only have one OTP at a time.
Setting an emergency password Enter master password (default: 0000) then press Press <6> then press Enter emergency password (four to ten digits) then press NOTE: • You can only have one emergency password at a time. • The emergency password cannot be the same as the user password or the one time password. • The emergency password can be used repeatedly, you can change the emergency password if needed.
Enabling/Disabling automatic locking Enter master password (default: 0000) then press Press <8> then press NOTE: • This function is disabled by default. • When you enable this function, the door will automatically lock after it is closed for thirty (30) seconds. • To disable this function, repeat the above steps. Enabling/Disabling keypad sound Enter master password (default: 0000) then press Press <9> then press Resetting to factory settings 1.
Troubleshooting 1. After installing and inserting batteries for the first time, pressing does not lock the door. (short beep) Problem: The lock direction is not set up yet. Resolution: Ensure to set the lock direction first after your ASUS DL101 is installed. 2. After installing and inserting batteries for the first time, there is no response when I press any key. (no beep and no panel light) Problem: The batteries are faulty or the cable is not in the correct orientation.
4. I can set the lock direction, but door would not lock. (red LED light blinks, three long beeps, motor turns slowly, lockbolt stuck, thumbturn lever jammed) Problem: The batteries are low. Resolution: Replace the batteries. 1 2 3 5. I can lock the door, but I cannot unlock the door when 2 I enter 3 my password. (long beep) 4 5 6 4 Problem: 76. 8 the door 9 is closed, When locks the door, OK pressing 0 but a long beep goes off.
Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Canada, Industry Canada (IC) Notices This device complies with Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d’Industry Canada (IC) Cet appareil est conforme avec Industrie Canada exemptes de licence RSS standard(s).
Regional notice for California WARNING! This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
English AsusTek Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of CE Directives. Please see the CE Declaration of Conformity for more details. Français AsusTek Inc. déclare par la présente que cet appareil est conforme aux critères essentiels et autres clauses pertinentes des directives européennes. Veuillez consulter la déclaration de conformité CE pour plus d’informations. Deutsch AsusTek Inc.
Srpski AsusTek Inc. ovim izjavljuje da je ovaj uređaj u saglasnosti sa ključnim zahtevima i drugim relevantnim odredbama CE Direktiva. Molimo vas, pogledajte CE Deklaraciju o usklađenosti za više detalja. Slovensky Spoločnosť AsusTek Inc. týmto prehlasuje, že toto zariadenie vyhovuje príslušným požiadavkám a ďalším súvisiacim ustanoveniam smerníc ES. Viac podrobností si pozrite v prehlásení o zhode ES. Slovenščina AsusTek Inc.
The center of the cross bore hole will vary per thickness of the door. Cross bore hole Ø25.4 mm (1”) Fold along this line and align it to the corner edge of the door.
Fold along this line and align it to the corner edge of the door. Lockbolt length 60 mm (2-3/8”) Drilling template (60 mm lockbolt) Cross bore hole Ø25.4 mm (1”) The center of the cross bore hole will vary per thickness of the door.
