User Manual

Chapter 4: Additional Information
38 Chapter 4
Back of the Unit (DCW615)
Description of Jacks (from left to right)
1. Wireless PC card Connects to the Wireless Network PC Card to enable wireless
features. This is not hot swappable.
2. Power switch and jack Connects to the AC power adapter.
3. Reset button Resets the gateway’s TCP/IP connections.
Pressing the Reset button and holding it in for a few seconds will
clear all of the gateway’s data and restore the factory defaults. This
should be done only after you have exhausted all troubleshooting
options. By resetting the gateway, you clear all configurations you
have set using the gateway web pages, and run the risk of creating
conflicts between your PC’s actual IP Addresses and the factory
default addresses embedded into the gateway.
4. HPNA Connects to the telephone wiring in your house.
5. USB Connects to the USB jack on your PC.
6. Ethernet ports Connect to networked devices, such as PCs, print servers and any
other Ethernet devices you want to put on your network.
7. CABLE Connects to the coaxial cable jack from your cable company.
Power
HPNA
Reset USB
1 2 3 4
CABLE
Wireless PC Card
1
2
34
56 7
16096620 DCW615/25. 04 Addit 6/26/03, 10:45 AM38