User Manual

Chapter 1 9
Chapter 1: Overview and Setup
Your PC: Installing a TCP/IP Stack
Follow these instructions to install the TCP/IP protocol stack on one of your PCs only after a
network card has been successfully installed inside the PC. These instructions are for Windows Me.
For TCP/IP setup under Windows NT, 2000, and XP, refer to your Windows documentation.
1. Click the Start button. Choose Settings and then Control Panel.
2. Double-click on the Network icon to bring up your
Network window. Select the Configuration tab.
3. Click the Add button.
4. Double-click on Protocol.
Fig. 1
5. Highlight Microsoft under the list of manufacturers.
6. Find and double-click TCP/IP in the list to the right (see
Figure 9).
Fig. 2
16096620 DCW615/25. 01 Oview 6/26/03, 10:45 AM9