User Manual
AIR3 33
AIR3
Read the following Q&As for troubleshooting guide. If these do
not give you answers, you may contact us directly at the contact
information provided on this manual’s inside cover.
Why is it that I cannot hear anything from the speakers?
• Some stations may not have 24-hour broadcasts. You cannot hear
anything If the stations do not send out any programs.
• Either your AIR3 speakers are muted or the volume is too low.Either your AIR3 speakers are muted or the volume is too low.
Turn up the volume or press the Mute button ( ) to cancel the
muted mode. If you are using additional speakers, make sure that
the connected speaker system is powered on.
I have connected AIR3 to my playback device but there is no sound
coming out.
• Ensure that you have plugged the audio cable to the AUX IN jack
on AIR3 and have pressed the AUX mode button ( / ) to
switch the device to that mode.
• In AUX mode, neither AIR3 top panel buttons nor the remote
control works on your playback device.
Why is it that I cannot activate UPnP?
You need to connect both your PC and AIR3 to the same network.
What can I do if my AIR3 crashes?
Press the power switch on the rear panel to turn off the device, and
then switch it on again.
I have set the alarm but it did not set off.
The alarm will set off only in standby mode.
The wireless connection is not stable.
• Establish a wired connection to test if your network is reliable.
• If the wired connection is more stable than the wireless one, use
the LAN connection instead.
Troubleshooting