User's Manual

Chapter 1
Product Introduction
1-4 GSM/GPRS CF+ Card
1.6 Connecting to a PCMCIA adapter
The PCMCIA card adapter included in the product package fits in any PC
equipped with a Personal Computer Memory Card International Association
(PCMCIA) Type II socket.
To connect the CF card to a PCMCIA adapter:
1. Position the CF card and the PCMCIA adapter as shown.
PCMCIA adapter lock
The adapter has a lock that secures the card and protects the connector pins.
When not in use, slide the latch to the upper right corner of the groove.
3. Carefully press the CF card into the slot until it fits completely.
2. Slide the side grooves of the CF card to the rails of the adapter. The 50-pin
female connector on the card should match the 50-pin male connector on the
adapter.
Side groove
Rail
50-pin male connector
50-pin female connector
(underneath)
DO NOT flip up the CF card antenna at this time to avoid breaking the
hinge.
Lock groove
Latch location
when locked