User's Manual

Chapter 1
GSM/GPRS CF+ Card 1-3
Product Introduction
1.5 Installing and removing a SIM card
You need to use a SIM (Subscriber Identity Module) card with your CF card to
allow mobile communication through GPRS or GSM modes.
To install a SIM card:
1. Locate the SIM card slot.
2. Position the SIM card with the contact gold plate
up and the notched corner parallel to the
antenna.
3. Insert the SIM card all the way into the slot.
(The edge of the SIM card should align with the
side of the CF card slot.)
To remove a SIM card:
1. Locate the SIM card eject hole at the back of the CF card.
2. Insert a pen tip on the eject hole and slide it toward the direction of the
arrow. The SIM card slides out.
3. Remove the SIM card from the slot.
Eject hole
SIM card