User's Manual

Advanced
Advanced features of the wireless LAN interface can be configured in this section.
Settings can be configured for the following—
x AP Isolation—if you select enable, then each of your wireless clients will
not be able to communicate with each other.
x Band—a default setting at 2.4GHz – 802.11g
x Channel-- 802.11b and 802.11g use channels to limit interference from
other devices. If you are experiencing interference with another 2.4Ghz
device such as a baby monitor, security alarm, or cordless phone, then
change the channel on your router.
x Multicast Rate—the rate at which a message is sent to a specified group of
recipients.
x Basic Rate—the set of data transfer rates that all the stations will be
capable of using to receive frames from a wireless medium.
x Fragmentation Threshold—used to fragment packets which help improve
performance in the presence of radio frequency (RF) interference.
x RTS Threshold (Request to Send Threshold)—determines the packet size
of a transmission through the use of the router to help control traffic flow.
x DTIM Interval—sets the Wake-up interval for clients in power-saving mode.
x Beacon Interval—a packet of information that is sent from a connected
device to all other devices where it announces its availability and
Zhone 4-Port Wireless Ethernet Router
User Manual
61
Version 1.0
Document #: BD-ZU0011-10