User's Manual

TriplePlay
User Manual
52
Version 1.0
Document #: BD-TU0001-10
Wireless Bridge
In this next screen you can select the mode, either access point or
wireless bridge that you want the router to be in. In the screen
below, bridge restrict is enabled, therefore you see the remote
bridges MAC address fields. If bridge restrict is disabled, then
there is nothing left to do afterwards. Click on Save / Apply to
continue.
Advanced
Advanced features of the wireless LAN interface can be
configured in this section.
Settings can be configured for the following—
• AP Isolation—if you select enable, then each of your
wireless clients will not be able to communicate with each
other.
• Band—a default setting at 2.4GHz – 802.11g
• Channel— 802.11b and 802.11g use channels to limit
interference from other devices. If you are experiencing
interference with another 2.4Ghz device such as a baby
monitor, security alarm, or cordless phone, then change the
channel on your router.
• Multicast Rate—the rate at which a message is sent to a
specified group of recipients.