User's Manual

TriplePlay
User Manual
67
Version 1.0
Document #: BD-TU0001-10
Configure System Log
If the log is enabled, the system will log selected events including
Emergency, Alert, Critical, Error, Warning, Notice, Informational,
and Debugging. All events above or equal to the selected log
level will be logged and displayed.
If the selected mode is “Remote” or “Both”, events will be sent to
the specified IP address and UDP port of a remote system log
server. If the selected mode is “Local” or “Both”, events will be
recorded in the local memory. Select the desired values and click
on the “Save/Apply” button to configure the system log options.
SNMP
SNMP (Simple Network Management Protocol) provides a means
to monitor status and performance as well as set configuration
parameters. It enables a management station to configure,
monitor and receive trap messages from network devices.