User's Manual

Front Panel View
LED
5
Zhone Bonded Channel
User Manual
Version 1.1
Document #: BD-ZU0007-11
Mode Definition
Solid (green) IP is connected and no traffic detected.
Modem is in bridged mode or ADSL connection
not present.
No light
Blinking Connected and traffic is present.
Internet
Red Device attempted to connect to IP and failed.
Solid Wireless is enabled.
No light Wireless is disabled.
AP
Blinking There is wireless traffic.
Solid ADSL is connected, and there is no ADSL traffic.
No light ADSL is not connected.
DSL2 ACT
Blinking There is ADSL traffic.
Solid ADSL is connected, and there is no ADSL traffic.
No light ADSL is not connected.
DSL1 ACT
Blinking There is ADSL traffic.
Solid Router is connected to the LAN.
No light
No connection to the LAN. Check if the LAN cable
is connected to the router.
LAN1-LAN4
Blinking LAN traffic
Solid Router is powered on.
Power
Router is not powered. Check if the router is
plugged in and if the power switch is turned on.
No light