User's Manual

Wireless
This section allows you to configure wireless settings on your router.
Basic
The below Wireless—Basic screen lets you enable or disable wireless. The
default setting for wireless is enabled. You can also hide the access point so
others cannot see your ID on the network.
Security
The next screen is the Wireless – Security screen which allows you to select
the network authentication method and to enable or disable WEP
encryption. Note that depending on the network authentication that is
selected, the screen will change accordingly so additional fields can be
configured for the specific authentication method.
Network authentication methods include the following—
• Open—anyone can access the network. The default is a disabled WEP
encryption setting.
• Shared—WEP encryption is enabled and encryption key strength of
64-bit or 128-bit needs to be selected. Click on Set Encryption Keys
to manually set the network encryption keys. Up to 4 different keys
can be set and you can come back to select which one to use at
anytime.
53
Zhone Bonded Channel
User Manual
Version 1.1
Document #: BD-ZU0007-11