User's Manual
Table Of Contents
- 1 Introduction
- NOTE:
- NOTE:
- 2 Product Architecture
- 3 Electrical Specifications
- 4 Mechanical Specifications
- 5 Performance
- 1. BT in SW RF-KILL in all the tests
- 2. HB values refer to internal FE SKU
- 3. OS: Win10
- 1. Wi-Fi in SW RF-KILL in all the tests
- 2. OS: Win10
- 3. WsP is Master device
- 1. The TX power per MCS relate to IEEE, mask compliance and limited by regulatory TX power limits.
- 2. The values relate to internal FE SKU
- 3. The values are for typical device and typical conditions
- 1. Measured at ANT port
- 2. Typical means Nominal corner, AVG over non BE CHs. AVG over freq segment and chains
- 3. Max means over PVT
- NOTE: The throughput values relate to Intel® Skylake Platform and CPU, Single User.
- 6 Thermal Specifications
- 7 Regulatory
- 8 Dynamic Regulatory Solution
- 9 Platform Design Guidelines
- 9.1 Socket 1 key options for 2230 cards
- 9.1.1 Socket 1 Hybrid Key E scheme
- 9.1.2 Connectorized Hybrid Key E (2230) pin-out
- 9.1.3 Special considerations for the Hybrid Key E scheme
- 9.1.4 Soldered-down (1216) pin-out
- 9.1.5 Breakout example for JfP soldered-down module
- 9.1.6 Signal connection pitfalls
- 9.1.7 Pullups and pulldowns
- 9.1.8 IO connection scenarios and best practices
- 9.1.9 I/F specific guidelines
- 9.1.10 Connectivity module power control
- 9.1.11 Power supply de-coupling
- 9.1.12 Wi-Fi wireless disable and HW RF-KILL
- 9.1.13 M.2 Bluetooth HW RF-KILL
- 9.1.14 BIOS
- 9.1 Socket 1 key options for 2230 cards
Regulatory
Intel
®
Wireless-AC 9560 (Jefferson Peak)
April 2017 External Product Specification (EPS)
Document Number: 567240–1.0 Intel Confidential 43
Output Power (dBm)
Country/Geo 2.4 GHz
5.15 –
5.25
GHz
5.25 –
5.35
GHz
5.47 –
5.65 GHz
5.65 –
5.725 GHz
5.725 –
5.85 GHz
Unit
China EIRP
20 23 23 30 30 33 dBm
Worst Case Cond.
mW
2
100 50 200 250 250 100 mW
Worst Case Cond.
dBm
1
17 18 18 18 18 18 dBm
NOTES: Reference antenna gain: Max. Antenna Gain 3 dBi for 2.4 GHz and 5 dBi for 5 GHz
1. Assuming Max. Antenna Gain 3 dBi for 2.4 GHz and 5 dBi for 5 GHz
2. Allowance of up to a 6 dBi antenna allowed, if antenna is > 6 dBi output power must be reduced by 1 dB per
dBi of antenna gain.
3. As DFS Slave Device (30 dBm for Master).
7.3 Regulatory and safety certification
The following regulatory and safety information is subject to change.
Table 7–2 Wi-Fi safety and regulatory USA
USA Requirements Criteria
EMI FCC Part 15, Subpart B, Class B (CISPR 22 limits at 10 m)
RF FCC Part 15, Subpart C (Sections 15.205, 15.207, 15.209, and
15.247)
FCC Part 15, Subpart E (Section 15.407)
Safety UL 60950–1
Table 7–3 Wi-Fi safety and regulatory Europe
Europe Requirements Criteria
EMC EN301489–1, EN 301489–17
RF EN300 328, EN300 440 and EN301–893 as DFS slave terminal
Safety EN60950–1 via CB Report (IEC60950–1)
R&TTE Health Requirement referring to the EN 50566–2013 and
62209–2:2010
Table 7–4 Wi-Fi safety and regulatory Japan
Japan Requirements Criteria
EMI VCCI Class B
RF STD T66, STD T71, ARIB W52, W53, W56
Safety EN60950–1 via CB Report (IEC60950–1)
R&TTE Health Requirement referring to the EN 50566–2013 and
62209–2:2010