User's Manual
Table Of Contents
- 1 Introduction
- NOTE:
- NOTE:
- 2 Product Architecture
- 3 Electrical Specifications
- 4 Mechanical Specifications
- 5 Performance
- 1. BT in SW RF-KILL in all the tests
- 2. HB values refer to internal FE SKU
- 3. OS: Win10
- 1. Wi-Fi in SW RF-KILL in all the tests
- 2. OS: Win10
- 3. WsP is Master device
- 1. The TX power per MCS relate to IEEE, mask compliance and limited by regulatory TX power limits.
- 2. The values relate to internal FE SKU
- 3. The values are for typical device and typical conditions
- 1. Measured at ANT port
- 2. Typical means Nominal corner, AVG over non BE CHs. AVG over freq segment and chains
- 3. Max means over PVT
- NOTE: The throughput values relate to Intel® Skylake Platform and CPU, Single User.
- 6 Thermal Specifications
- 7 Regulatory
- 8 Dynamic Regulatory Solution
- 9 Platform Design Guidelines
- 9.1 Socket 1 key options for 2230 cards
- 9.1.1 Socket 1 Hybrid Key E scheme
- 9.1.2 Connectorized Hybrid Key E (2230) pin-out
- 9.1.3 Special considerations for the Hybrid Key E scheme
- 9.1.4 Soldered-down (1216) pin-out
- 9.1.5 Breakout example for JfP soldered-down module
- 9.1.6 Signal connection pitfalls
- 9.1.7 Pullups and pulldowns
- 9.1.8 IO connection scenarios and best practices
- 9.1.9 I/F specific guidelines
- 9.1.10 Connectivity module power control
- 9.1.11 Power supply de-coupling
- 9.1.12 Wi-Fi wireless disable and HW RF-KILL
- 9.1.13 M.2 Bluetooth HW RF-KILL
- 9.1.14 BIOS
- 9.1 Socket 1 key options for 2230 cards
Performance
Intel
®
Wireless-AC 9560 (Jefferson Peak)
April 2017 External Product Specification (EPS)
Document Number: 567240–1.0 Intel Confidential 37
Wi-Fi
Sensitivity
Targets 2230
[dBm]
Wi-Fi Sensitivity
Targets 1216
[dBm]
Band Mode Conditions Typ Max Typ Max
MCS7, BW 80 MHz, 10% PER
MCS8, BW 80 MHz, 10% PER -66.5 -66.5
MCS9, BW 80 MHz, 10% PER -64.5 -64.5
MCS0, BW 160 MHz, 10% PER -85.5 -85.5
MCS8, BW 160 MHz, 10% PER -62.5 -62.5
MCS9, BW 160 MHz, 10% PER -60.5 -60.5
NOTES:
1. Measured at ANT port
2. Typical means Nominal corner, AVG over non BE CHs. AVG over freq segment and chains
3. Max means over PVT
5.2.3 Wi-Fi throughput targets
Table 5–5 Wi-Fi throughput
Scenario Description Value [Mbps] Notes
11n 20 MHz 2SS Rx Conductive, best attenuation, UDP 124
11n 20 MHz 2SS TX Conductive, best attenuation, UDP 125
11n 40 MHz 2SS Rx Conductive, best attenuation, UDP 251
11n 40 MHz 2SS TX Conductive, best attenuation, UDP 248
11ac 80 MHz 2SS Rx Conductive, best attenuation, UDP 660
11ac 160 MHz 2SS TX Conductive, best attenuation, UDP 650
11ac 160 MHz 2SS Rx Conductive, best attenuation, UDP 1509
11ac 80 MHz 2SS TX Conductive, best attenuation, UDP/IP 1533
11n 20 MHz 2SS Rx Conductive, best attenuation, TCP/IP 120
11n 20 MHz 2SS TX Conductive, best attenuation, TCP/IP 112
11n 40 MHz 2SS Rx Conductive, best attenuation, TCP/IP 241
11n 40 MHz 2SS TX Conductive, best attenuation, TCP/IP 210
11ac 80 MHz 2SS Rx Conductive, best attenuation, TCP/IP 600
11ac 80 MHz 2SS TX Conductive, best attenuation, TCP/IP 575
11ac 160 MHz 2SS Rx Conductive, best attenuation, TCP/IP 1251
11ac 160 MHz 2SS TX Conductive, best attenuation, TCP/IP 1252
NOTE: The throughput values relate to Intel
®
Skylake Platform and CPU, Single User.