User's Manual
Table Of Contents
- 1 Introduction
- NOTE:
- NOTE:
- 2 Product Architecture
- 3 Electrical Specifications
- 4 Mechanical Specifications
- 5 Performance
- 1. BT in SW RF-KILL in all the tests
- 2. HB values refer to internal FE SKU
- 3. OS: Win10
- 1. Wi-Fi in SW RF-KILL in all the tests
- 2. OS: Win10
- 3. WsP is Master device
- 1. The TX power per MCS relate to IEEE, mask compliance and limited by regulatory TX power limits.
- 2. The values relate to internal FE SKU
- 3. The values are for typical device and typical conditions
- 1. Measured at ANT port
- 2. Typical means Nominal corner, AVG over non BE CHs. AVG over freq segment and chains
- 3. Max means over PVT
- NOTE: The throughput values relate to Intel® Skylake Platform and CPU, Single User.
- 6 Thermal Specifications
- 7 Regulatory
- 8 Dynamic Regulatory Solution
- 9 Platform Design Guidelines
- 9.1 Socket 1 key options for 2230 cards
- 9.1.1 Socket 1 Hybrid Key E scheme
- 9.1.2 Connectorized Hybrid Key E (2230) pin-out
- 9.1.3 Special considerations for the Hybrid Key E scheme
- 9.1.4 Soldered-down (1216) pin-out
- 9.1.5 Breakout example for JfP soldered-down module
- 9.1.6 Signal connection pitfalls
- 9.1.7 Pullups and pulldowns
- 9.1.8 IO connection scenarios and best practices
- 9.1.9 I/F specific guidelines
- 9.1.10 Connectivity module power control
- 9.1.11 Power supply de-coupling
- 9.1.12 Wi-Fi wireless disable and HW RF-KILL
- 9.1.13 M.2 Bluetooth HW RF-KILL
- 9.1.14 BIOS
- 9.1 Socket 1 key options for 2230 cards
Mechanical Specifications
Intel
®
Wireless-AC 9560 (Jefferson Peak)
External Product Specification (EPS) April 2017
26 Intel Confidential Document Number: 567240–1.0
4 Mechanical Specifications
Note: The module’s mechanical specifications adhere to the PCIe_M.2_Electromechanical_Spec.
4.1 Weight
Table 4-1 Weight
Product SKU Size (mm × mm) Weight (g)
Jefferson Peak 2230
22x30 TBD
Jefferson Peak 1216
12x16 TBD
4.2 M.2 2230 mechanical specification
This section describes the mechanical specification of Jefferson Peak 2230 modules. Figure 4–1 shows
the dimensions for type 2230. Antenna connector configuration and functionality for this form factor is
listed in Table 4-2 and shown in Figure 4–2
Figure 4–1 Jefferson Peak M.2 2230 SKU dimensions
Table 4-2 Type 2230 antenna connector functionality
Antenna connector functionality
Wi-Fi (Chain A) + BT ANT1
Wi-Fi (Chain B) ANT2