User Manual

IMPORTANT SAFETY AND LEGAL INFORMATION
282
own or their children’s RF exposure by limiting the length of calls, or
using ‘hands-free’ devices to keep mobile phones away from the
head and body.
Further information on this subject can be obtained from the WHO
home page http://www.who.int/peh-emf
WHO Fact sheet 193: June
2000.
FCC RF Safety Statement
In order to comply with FCC RF exposure safety guidelines, users
MUST use one of the following types of bodyworn accessories:
•A Palm
®
brand body-worn accessory that has been tested for
SAR compliance and is intended for use with this product.
• An accessory that contains NO metal (snaps, clips, etc) and
provides AT LEAST 1.5 cm of separation between the users body
and the unit.
Do NOT use the device in a manner such that it is in direct
contact with the body (i.e. on the lap or in a breast pocket). Such use
will likely exceed FCC RF safety exposure limits. See
www.fcc.gov/oet/rfsafety/
for more information on RF exposure
safety.
Responsible party
(North America) (Europe)
Palm Inc. Roy Bedlow
950 W. Maude Ave. Buckhurst Court
Sunnyvale, CA 94085 London Road
USA Wokingham, Berkshire RG40 1PA,
palm.com
UK
Declaration of Conformity
We, Palm Inc., declare under sole responsibility that the product:
Model name: Treo 500v
Description: PDA phone
Is in conformity with the following standards and/or other normative
document:
• ETSI EN 301 511
• ETSI EN 301 908-1
• ETSI EN 301 908-2
• ETSI EN 300 328
• ETSI EN 301 489-1/-7/-17/-24
• EN60950-1
• EN 50360
We hereby declare that the above named product is in conformance
to all essential requirements of the RTTE Directive 1999/5/EC.
The conformity assessment procedure referred to Article 10 and
detailed in Annex IV of directive 1999/5/EC has been related to
Articles:
• R&TTE Article 3.1 (a) Health and Safety
• R&TTE Article 3.1 (b) EMC
• R&TTE Article 3.2 Spectrum Usage
Identification mark 0984 (notified body) CE.
This identification mark is permanently provided on the device label.
The technical documentation relevant to the above equipment will be
held at:
Palm Inc.
950 W Maude Avenue
Sunnyvale, CA. 94085
U.S.A.