User Manual

YOUR PHONE
TURNING YOUR PALM
®
TREO
™
500V SMARTPHONE ON/OFF
36
4
CHAPTER
Turning your phone on
1 Press Power and select Wireless
Manager.
2 Select Phone.
3 Press Done (left softkey).
When your smartphone locates a signal,
your network operator’s name appears in
the upper-left of the screen and the
signal-strength icon appears at the top
of the screen.
When you turn on your phone, it connects
to a mobile network so that you can make
and receive phone calls and use other
wireless services (if supported by the local
network). When you are inside a coverage
area, the signal-strength icon has bars
in it. If you’re outside a coverage area, the
indicator light flashes red and no bars
appear in the signal-strength icon.
Turning your smartphone on
When you turn on your smartphone, the
phone automatically turns on.
• Press and hold Power until the
Palm logo appears.
Turning your smartphone off
• Press and hold Power . When your
phone is off, the screen turns off. You
cannot make phone calls or use any of
the organiser features on your
smartphone.
Waking up the screen
After a designated period of inactivity, your
smartphone screen turns off, even though
your smartphone is still powered on. If the
screen turns off, wake up the screen by
pressing any key. If you press End , you
automatically go to the Home screen after
you wake up the screen. If you press any
other key, the last screen you were using
is displayed.
TIP If battery power is extremely low, the
screen does not turn on when you press and
hold Power. If this happens, you need to
charge the battery.
TIP You can also turn your smartphone off by
pressing Power and selecting Power off.