User Manual

SETTING UP
CHARGING THE BATTERY
11
2
CHAPTER
plan from your network operator in
addition to your service contract. You
may also need a data service plan to
send and receive multimedia
messages.
Charging the battery
Although the battery may come with a
sufficient charge to complete the setup
process, we recommend that after setup
you charge your smartphone for three
hours (or until the indicator light is solid
green) to give it a full charge. See
Maximisi
ng battery life for tips on making
your battery’s power last longer.
BEFORE YOU BEGIN Make sure the
battery is inserted in your smartphone
before you charge. If you connect your
smartphone to a power source without the
battery inserted, nothing happens.
1 Prepare the AC charger by inserting the
adapter that fits the wall outlet you’re
going to use.
2 Plug the AC charger into a wall outlet.
3 Connect the charger cable to the
bottom of your smartphone.
4 Check the indicator light to confirm that
your smartphone is charging.
• Solid red indicates that your
smartphone is charging.
• Solid green indicates that your
smartphone is fully charged.
TIP You can buy an extra battery as a spare for
long airplane trips or periods of heavy data
use. To ensure proper functioning and avoid
nullifying the warranty, be sure to use
batteries from Palm only. Visit palm.com
.
Indicator light